Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    Oct 2021
    Reputation
    10
    Posts
    1

    M.2 Gen 3 question on Z590 Motherboard

    I am trying to put together a new PC based on a ROG STRIX Z590-E. I was planning on an 11th gen i7 CPU so I could get access to the first M.2 SSD slot and utilize the extra four PCIe lanes in the 11th gen CPU's have over the 10th gen. I know this is a Gen 4 M.2 slot which can only be accessed using the 11th gen CPU. But I am having to cut some corners to make this system happen. To save almost $200, can I install a PNY CS2130 4TB M.2 NVMe SSD which is a Gen 3 in that number 1 M.2? My instinct is that this should work, and that the M.2 slot will revert to Gen 3 speeds and work normally otherwise as long as I have the right CPU installed. I just can't find where anything or anyone has documented this. Thank you.

  2. #2
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    367
    Posts
    8,331

    Yes, gen 4 slots are backwards compatible with gen 3 drives.
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  3. #3
    New ROGer Array
    Join Date
    Oct 2021
    Reputation
    10
    Posts
    7

    Gen 4 PCI m.2 is backwards compatible with gen PCI 3 m.2 SSD at the gen 3 speeds of course.

    https://premioinc.com/blogs/blog/pci...%20performance.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •