Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jun 2020
    Reputation
    10
    Posts
    1

    BIOS 1903 XMP failing to post Strix Z390-f motherboard

    I have just updated my bios from 1802 to 1903 and I cannot use XMP profiles as machine then fails to post and goes into safe mode. If I use the base BIOS it works and if I leave on auto and change the clock speed to that of my memory it works. Not sure what further things I could do to solve the issue other than rollback the BIOS. Up to this BIOS update not issues with using XMP.

    System details
    Motherboard: ROG Strix Z390-F gaming
    Memory: 4x 16GB Corsair Vengeance DDR4 3000Hz
    CPU: I9-9900K

    Update: Found solution as the timings on each pair of ram was slightly different. Took them both out and then put in the one with the slightlyu lower (by 1 timings). XMP then worked. Then put in other two sticks of RAM. No problems sionce.
    Last edited by travelmeister; 10-24-2021 at 03:27 PM. Reason: Foudn solution

  2. #2
    New ROGer Array
    Join Date
    Jul 2021
    Reputation
    10
    Posts
    3

    I had this issue on 1902 as well, and had to rollback to the beta 1901 version (the first to enable resizable bar on this board) to get my computer to post at all with XMP profiles. So I'd suggest finding that version if possible if you value XMP. It is unfortunately no longer hosted on the official downloads page from what I can tell.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •