Maximus Z690 and Alder Lake: Modern CPU’s require Modern Overclocking Solutions

[thewebsiteisdown]

I have the same memory and the same problem.2 kit of 2x8gb.
0605 version can enable xmp. 0707 and 0807 and 0808 will not work.Both xmp i and xmp ii will not work, and manual configuration will not work either.
These memories are C16 Hynix particles.

Have you tried 0803? I have the F4-4000C17Q-32GTZR kit and it works nice.

[TomCom205]

Hi there,

I still can't get my G.Skill RAM 6000 CL36
to work on the ASUS ROG Z690 Extreme.

I had it running for like 9 hours with 1,25Volt VDD an VDDQ and about 8 runs of TM5 (extreme)
one cold reboot and it is not longer working.

The 0002 Bios and 0803 Bios both change after a cold reboot they maybe not work with Settings that have been working well before.

Hopefully this is going to be fixed soon.

XMP1 or XMP2 is not working at all.

Is there a newer Bios i can try?

[Silent Scone@ROG]

Hi there,

I still can't get my G.Skill RAM 6000 CL36
to work on the ASUS ROG Z690 Extreme.

I had it running for like 9 hours with 1,25Volt VDD an VDDQ and about 8 runs of TM5 (extreme)
one cold reboot and it is not longer working.

The 0002 Bios and 0803 Bios both change after a cold reboot they maybe not work with Settings that have been working well before.

Hopefully this is going to be fixed soon.

XMP1 or XMP2 is not working at all.

Is there a newer Bios i can try?

Hello,

What stop code on the Q-Code LED?

[Silent Scone@ROG]

Hello,

Apex with Micron Kingston Fury 4800C38. No active airflow, hardline build so not benchtable. Modules tapping out at around 63c.



Per C 54/53/52
Adaptive 1.37v
Cache 40
E Core 41 Sync

IMCVVD 1.25
SA 1.2
VDD 1.35
VDDQ 1.4
TX VDDQ 1.4
Tweak Mode 1
5400 CAS 36-39-36-52 2T.

[RavenMaster]

Hi there,

I still can't get my G.Skill RAM 6000 CL36
to work on the ASUS ROG Z690 Extreme.

I had it running for like 9 hours with 1,25Volt VDD an VDDQ and about 8 runs of TM5 (extreme)
one cold reboot and it is not longer working.

The 0002 Bios and 0803 Bios both change after a cold reboot they maybe not work with Settings that have been working well before.

Hopefully this is going to be fixed soon.

XMP1 or XMP2 is not working at all.

Is there a newer Bios i can try?

Are you using 4 sticks of RAM or 2? If only 2, are you running them in slots A2 and B2? Or are you running them in slots A1 and B1?

[pocari168]

Hi there,

I still can't get my G.Skill RAM 6000 CL36
to work on the ASUS ROG Z690 Extreme.

I had it running for like 9 hours with 1,25Volt VDD an VDDQ and about 8 runs of TM5 (extreme)
one cold reboot and it is not longer working.

The 0002 Bios and 0803 Bios both change after a cold reboot they maybe not work with Settings that have been working well before.

Hopefully this is going to be fixed soon.

XMP1 or XMP2 is not working at all.

Is there a newer Bios i can try?

I have same issue for my 12900k & G.Skill DDR5-6000 CL36 on XMP1 and XMP2. 703 is More stable, but even i flash back to 703 bios still can't run stable in XMP 1/2 for 6000Mhz. I only can run stable in windows 11 with 703 + XMP 1 in 5400/5600Mhz, Windows 11 will reboot when i using aida64 memory brenchmark for test.

I have the similar config as below:
CPU: intel 12900k
Ram: G Skill Trident Z5 RGB DDR5-6000 CL36-36-36-76 16GB x 2, running them in slots A2 and B2
Mother Board: asus maximus hero

[rjbarker]

Hello,

Apex with Micron Kingston Fury 4800C38. No active airflow, hardline build so not benchtable. Modules tapping out at around 63c.



Per C 54/53/52
Adaptive 1.37v
Cache 40
E Core 41 Sync

IMCVVD 1.25
SA 1.2
VDD 1.35
VDDQ 1.4
TX VDDQ 1.4
Tweak Mode 1
5400 CAS 36-39-36-52 2T.

Silent Scone....that impressive Memory OC'ing !!!!
Im still waiting for my Kingston Fury 5200 C40 kit......I have never used Kingston Memory.....nice to see its working well, as I'll also be using my Apex Board.

[Muad-Dib69]

I have same issue for my 12900k & G.Skill DDR5-6000 CL36 on XMP1 and XMP2. 703 is More stable, but even i flash back to 703 bios still can't run stable in XMP 1/2 for 6000Mhz. I only can run stable in windows 11 with 703 + XMP 1 in 5400/5600Mhz, Windows 11 will reboot when i using aida64 memory brenchmark for test.

I have the similar config as below:
CPU: intel 12900k
Ram: G Skill Trident Z5 RGB DDR5-6000 CL36-36-36-76 16GB x 2, running them in slots A2 and B2
Mother Board: asus maximus hero

same problen with g.skill 6000 cas 36 on Formula. Another guy on my forum also.
bios 803 no boot
bios 0002 boot but crashing all the time.
Can we have the bios 0015 to try?

[Shamino]

attempts to improve xmp , fixed a core ranking / core vid reading bug.
vmaxstress option name changed for future function
DC LL tracked to vrm LL at auto

https://www.dropbox.com/s/yc8c82hmp2...-0811.rar?dl=0
https://www.dropbox.com/s/h6opzwy0ee...-0811.rar?dl=0
https://www.dropbox.com/s/59hwlwjqsl...-0811.rar?dl=0
https://www.dropbox.com/s/4y7iseu23t...-0811.rar?dl=0
https://www.dropbox.com/s/s4ych6eyas...-0811.rar?dl=0

https://www.dropbox.com/s/h1cnqef1lt...-0811.rar?dl=0
https://www.dropbox.com/s/0n4oqr8fvm...-0811.rar?dl=0
https://www.dropbox.com/s/poiznc53gw...-0811.rar?dl=0
https://www.dropbox.com/s/t1m4s5mzc6...-0812.rar?dl=0
https://www.dropbox.com/s/f8kpqc0dkw...-0811.rar?dl=0
https://www.dropbox.com/s/euizkcgv50...-0811.rar?dl=0

https://www.dropbox.com/s/7vrrsc67h0...-0811.rar?dl=0
https://www.dropbox.com/s/a0opn4vvqy...-0811.rar?dl=0
https://www.dropbox.com/s/mrtkeipof3...-0811.rar?dl=0
https://www.dropbox.com/s/i4xv4ywydt...-0811.rar?dl=0

special test bios for apex:
https://www.dropbox.com/s/rgejzieui6...-0021.rar?dl=0

[Falkentyne]

Thank you for the Bios releases, Shamino!