11-14-2021 04:44 AM - last edited on 03-05-2024 06:49 PM by ROGBot
11-14-2021 06:49 PM
11-17-2021 04:06 AM
BigJohnny wrote:
Whats being left behind resides in the BIOS. Power down and kill your PSU and everything will go to default.
I use corsair Ique. You will have to have at least one corsair Ique device present but there is a plugin for the ASUS MOBOs. You just have to have the lighting ASUS lighting service (NOT CRATE) Installed but dont launch it then you can control the MOBO from Ique.
All you need is the last aura released aka Lighting control 1.07.79_V2.2
I uploaded it to Google Drive
https://drive.google.com/file/d/1p3n4VWwCEfItYl-ZlYC5AgpbSen5O9I9/view?usp=sharing
You can also run just the AURA without all the Crate BS
11-30-2021 11:52 PM
Zaheen wrote:
2 PSU, 3 NVMe, countless GPU replacements and RAM test and replacement of the CPU cooler and 15 Windows installs later I have come to the conclusion that Armoury Crate is the culprit for all the random screen freezes that force me to do a hard reset.
11-23-2021 11:22 AM
BigJohnny wrote:
Whats being left behind resides in the BIOS. Power down and kill your PSU and everything will go to default.
I use corsair Ique. You will have to have at least one corsair Ique device present but there is a plugin for the ASUS MOBOs. You just have to have the lighting ASUS lighting service (NOT CRATE) Installed but dont launch it then you can control the MOBO from Ique.
All you need is the last aura released aka Lighting control 1.07.79_V2.2
I uploaded it to Google Drive
https://drive.google.com/file/d/1p3n4VWwCEfItYl-ZlYC5AgpbSen5O9I9/view?usp=sharing
You can also run just the AURA without all the Crate BS
12-01-2021 11:00 PM
domholmes wrote:
Leaving just the Aura service will actually cause the RGB to be set after a full power loss boot. I just wish I could find where it reads its configuration from to change the RGB value without having to install the whole thing again.