Maximus V Formula

[SoF]

5 GHZ easy RAM pre-testing - shake your booodiiii

www.youtube.com/watch?v=HU997aKxu3E

[ParamedicSam]

@MeanBruceROG

I OCed my GPU to 1100MHz, while keeping the temp below 70C EASY. I will admit, I had to use EVGA Precision X because I noticed a problem with the Asus GPU Tweak. The voltage wasn't working, sooooooo I tested EVGA's software and it worked FLAWLESS. I will say this, I prefer Asus products but will have to pick EVGA software. Sorry Asus, Still love you.

Powered by Unigine Engine

Heaven Benchmark v3.0 Basic

FPS: 87.8
Scores: 2211
Min FPS: 35.3
Max FPS: 215.4

Hardware

Binary: Windows 32bit Visual C++ 1600 Release Mar 7 2012
Operating system: Windows 7 (build 7601, Service Pack 1) 64bit
CPU model: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
CPU flags: 3500MHz MMX SSE SSE2 SSE3 SSSE3 SSE41 SSE42 HTT
GPU model: NVIDIA GeForce GTX 670 8.17.13.142 2048Mb

Settings

Render: direct3d11
Mode: 1920x1080 8xAA fullscreen
Shaders: high
Textures: high
Filter: trilinear
Anisotropy: 16x
Occlusion: enabled
Refraction: enabled
Volumetric: enabled
Tessellation: extreme

Unigine Corp. © 2005-2012

UPDATE: Was just playing Smite and Arma 2 DayZ and the temp got to 54C (with 3 screens) and THAT ALL. Asus products own lol. Just wanted to voice my opinion again

[Ftruck]

It was a long wait down here in Australia but just got my shipping notification for my M5E about half an hour ago. Should have it tomorrow morning (Wednesday here), now I just have to go pick up an AX1200 and a Cosmos II on my next day off on Friday and I can put this beast together.

[sidewayz]

hi guys new here! just a question. is there an aftermarket compression fittings to fit the stock maximus v barbs? im kinda new to watercooling. wanted to reroute the waterloop

[Gipi49]

hi guys new here! just a question. is there an aftermarket compression fittings to fit the stock maximus v barbs? im kinda new to watercooling. wanted to reroute the waterloop

There is no adapter to compression fittings for the M5F ThermoFusion WB.

If you REALLY want a compression fitting you can use a 3/8" panel mount barb fitting to use as an adaptater (https://www.dazmode.com/store/produc...8_single_barb/). By cutting the right length of 3/8 ID tubing you will be able to make a "clean" connection.
But honestly I can't recommend to do this as it mutiplies the leak risks

Edit : And you'll have to live with an ugly gasket for the nut

[MeanBruceROG]

...............

[sidewayz]

Gipi49 thanks for the reply. btw i just used regular plastic tie strap on both barbs is that ok? or is there better clamp specific for that? anyway, im totaly a noob. just wondering can u guys teach me how to raid 0 the maximus formula? i have x2 corsair force gt. i set up RAID on bios and windows 7 doesnt load and asks me for a driver and im not sure which one to download? http://www.asus.com/Motherboards/Int...erFX/#download

SATA? how it works? i tried putting it on a usb stick and it doesnt load up on boot up? appreciate help guys thanks


BTW that new corsair psu is badass cant wait to get mine

[MeanBruceROG]

...............

[Gipi49]

Gipi49 thanks for the reply. btw i just used regular plastic tie strap on both barbs is that ok? or is there better clamp specific for that? anyway, im totaly a noob. just wondering can u guys teach me how to raid 0 the maximus formula? i have x2 corsair force gt. i set up RAID on bios and windows 7 doesnt load and asks me for a driver and im not sure which one to download? http://www.asus.com/Motherboards/Int...erFX/#download

SATA? how it works? i tried putting it on a usb stick and it doesnt load up on boot up? appreciate help guys thanks


BTW that new corsair psu is badass cant wait to get mine

Hi,

For the tie wrap you can suffer from leaking if you put too much stress on it, because the area of contact is small and you can damage the tubing. To understand, imagine you tightening a rope instead of a scarf around your neck
You'd better use one of these http://ncix.com/products/index.php?m...minorcatid=225
Just love the koolance ones, no screws no cheap plastic and reusable ... just search for the right OD tubing specs

Regarding the Raid0 do you have created the raid array before installing Windows ? Once you have configure RAID on bios you should have a screen to create the Raid array on reboot like this one



Just hit CTRL+i and set your raid 0 array with your two disks. At reboot install Windows 7 from the CD or USB key and it should work. As far as I know Windows 7 has the raid drivers right in the install CD.

Edit : See these threads for Raid0 help or troubleshooting if you need to
http://www.overclock.net/t/433053/as...id-not-working
http://www.overclock.net/t/427083/ha...bo#post5115727

[shaft]

Hi,
Can someone redirect me to the Formula thread? The last 50 pages of this one just seem to be spammed up with pictures and someones build log of the Extreme. thanks.