Page 2 of 4 FirstFirst 1 2 3 4 LastLast
Results 11 to 20 of 34
  1. #11
    ROG Member Array
    Join Date
    Nov 2021
    Reputation
    10
    Posts
    6

    Quote Originally Posted by Shamino View Post
    i posted a new bios up in the pinned thread
    still not boot also with 0812.....

  2. #12
    ROG Guru: Yellow Belt Array
    Join Date
    Dec 2013
    Reputation
    19
    Posts
    196

    Quote Originally Posted by ykeyre View Post
    Still stuck on 0707. Games and Chrome browser crashing but at least it boots to desktop. The ram sticks work perfectly on Z590. Can't believe Asus has regressed to such instability on DDR4 Z690.

    https://i.imgur.com/ilcQSPx.png
    https://i.imgur.com/XdJYTvU.png
    I dont think it is the bios. There is something else going on. CPU or MB. I saw on overclocker.net a couple people get defective cpus and mbs that wouldnt run XMP.

    Many are running single and dual rank at 3600-4000+ so if you cant I would bet is an issue somewhere else besides bios.

    If you havent done the basic trouble shooting like 1 dim at a time testing each slot I would start there. If you find a slot that allows xmp and 1 that doesnt then you can proceed from there as it is a hardware problem. a2 and b2 are the correct slot of 2x8 or 2x16.

    It is difficult to diagnose problems without multple cpus and mb to swap parts.

  3. #13
    ROG Member Array ykeyre PC Specs
    ykeyre PC Specs
    MotherboardROG MAXIMUS Z690 APEX
    Processori9-12900KS SP93
    Memory (part number)32GB DDR5 5600MT CL36 CMK32GX5M2B5600C36
    Graphics Card #1Nvidia Geforce RTX 3080 TI Founders Edition
    MonitorROG Swift PG329Q
    Storage #1Samsung 980 PRO 2 TB PCIe 4.0 M.2
    Storage #2Samsung 980 PRO 2 TB PCIe 4.0 M.2
    CPU CoolerCorsair iCUE H170i ELITE CAPELLIX
    Power SupplyCorsair HX1200 1200W 80+ Platinum
    OS Windows 11 Pro

    Join Date
    Oct 2021
    Reputation
    10
    Posts
    8

    Quote Originally Posted by bscool View Post
    I dont think it is the bios. There is something else going on. CPU or MB. I saw on overclocker.net a couple people get defective cpus and mbs that wouldnt run XMP.

    Many are running single and dual rank at 3600-4000+ so if you cant I would bet is an issue somewhere else besides bios.

    If you havent done the basic trouble shooting like 1 dim at a time testing each slot I would start there. If you find a slot that allows xmp and 1 that doesnt then you can proceed from there as it is a hardware problem. a2 and b2 are the correct slot of 2x8 or 2x16.

    It is difficult to diagnose problems without multple cpus and mb to swap parts.
    It is definitely a BIOS issue. 0707 works albeit unstable. Cannot even boot to windows on any other BIOS version. I have tried different set of RAM sticks, and even ordered a second 12900K. https://i.imgur.com/oJXJ69P.png

  4. #14
    ROG Guru: Yellow Belt Array
    Join Date
    Dec 2013
    Reputation
    19
    Posts
    196

    Quote Originally Posted by ykeyre View Post
    It is definitely a BIOS issue. 0707 works albeit unstable. Cannot even boot to windows on any other BIOS version. I have tried different set of RAM sticks, and even ordered a second 12900K. https://i.imgur.com/oJXJ69P.png
    I didnt know you where trying to run 4x16. It is not on the QVL or Gskill mem compatibily list for the MB so no suprise with doesnt work with XMP.

    Looking at Gskill site they show 4x16 as compatible with looser timings so you will probably have to manually loosen them until or if they ever release a bios that can run them at tigther timings. People are having issues with 4x8 so I am suprised you can even run 4x16 with tight timings at 3600.

  5. #15
    New ROGer Array
    Join Date
    Dec 2021
    Reputation
    10
    Posts
    1

    TUF GAMING Z690-PLUS WIFI D4 memory

    my board is TUF GAMING Z690-PLUS WIFI D4
    memory - 4x8gb kit gskill 18-22-22-42
    12900k
    all values - default except


    Ai Overclock Tuner [XMP II]
    XMP [XMP DDR4-4000 18-22-22-42-1.35V]
    ASUS MultiCore Enhancement [Enabled – Remove All limits]

    --------------
    unstable at tuf bios Version 0707
    and at Version 0807 stability is possibly even worse

    crash in tests aida64 stability after 1-3 minutes,
    occt errors on cores after 3-5 minutes
    1-2 bsod per workday

    how i solved the problem:

    firstly i noticed
    the system works stably if you start from scratch and go into the BIOS, manually adjust the timings
    you need to set manual those that the system shows in the current ones. as I understand they were obtained during training



    The main thing here is
    MCH Full Check [Enabled]
    Training Profile [Standard Profile]

    after the manual set this values and the MCH Full Check [Enabled] (disable at default),
    stability at aida64 and occt no errors - 1 hour test
    there are currently no bsod

    maybe it will be useful for those who have ROG STRIX Z690-A GAMING WIFI D4


    my values:
    DRAM CAS# Latency [18]
    DRAM RAS# to CAS# Delay [22]
    DRAM RAS# PRE Time [22]
    DRAM RAS# ACT Time [42]
    DRAM Command Rate [Auto]
    DRAM RAS# to RAS# Delay L [10]
    DRAM RAS# to RAS# Delay S [4]
    DRAM REF Cycle Time [700]
    DRAM REF Cycle Time 2 [520]
    DRAM REF Cycle Time 4 [320]
    DRAM Refresh Interval [15600]
    DRAM WRITE Recovery Time [Auto]
    DRAM READ to PRE Time [12]
    DRAM FOUR ACT WIN Time [48]
    DRAM WRITE to READ Delay [Auto]
    DRAM WRITE to READ Delay L [Auto]
    DRAM WRITE to READ Delay S [Auto]
    DRAM CAS to CAS Delay L [Auto]
    DRAM CKE Minimum Pulse Width [8]
    DRAM Write Latency [17]
    Ctl0 dqvrefup [Auto]
    Ctl0 dqvrefdn [Auto]
    Ctl0 dqodtvrefup [Auto]
    Ctl0 dqodtvrefdn [Auto]
    Ctl1 cmdvrefup [Auto]
    Ctl1 ctlvrefup [Auto]
    Ctl1 clkvrefup [Auto]
    Ctl1 ckecsvrefup [Auto]
    Ctl2 cmdvrefdn [Auto]
    Ctl2 ctlvrefdn [Auto]
    Ctl2 clkvrefdn [Auto]
    ODT RTT WR (CHA) [Auto]
    ODT RTT PARK (CHA) [240 DRAM Clock]
    ODT RTT NOM (CHA) [Auto]
    ODT RTT WR (CHB) [Auto]
    ODT RTT PARK (CHB) [240 DRAM Clock]
    ODT RTT NOM (CHB) [Auto]
    ODT_READ_DURATION [Auto]
    ODT_READ_DELAY [Auto]
    ODT_WRITE_DURATION [Auto]
    ODT_WRITE_DELAY [Auto]
    Round Trip Latency Init Value MC0 CHA [Auto]
    Round Trip Latency Max Value MC0 CHA [Auto]
    Round Trip Latency Offset Value Mode Sign MC0 CHA [-]
    Round Trip Latency Offset Value MC0 CHA [Auto]
    Round Trip Latency Init Value MC1 CHA [Auto]
    Round Trip Latency Max Value MC1 CHA [Auto]
    Round Trip Latency Offset Value Mode Sign MC1 CHA [-]
    Round Trip Latency Offset Value MC1 CHA [Auto]
    Round Trip Latency MC0 CHA R0 [Auto]
    Round Trip Latency MC0 CHA R1 [Auto]
    Round Trip Latency MC0 CHA R2 [Auto]
    Round Trip Latency MC0 CHA R3 [Auto]
    Round Trip Latency MC0 CHA R4 [Auto]
    Round Trip Latency MC0 CHA R5 [Auto]
    Round Trip Latency MC0 CHA R6 [Auto]
    Round Trip Latency MC0 CHA R7 [Auto]
    Round Trip Latency MC1 CHA R0 [Auto]
    Round Trip Latency MC1 CHA R1 [Auto]
    Round Trip Latency MC1 CHA R2 [Auto]
    Round Trip Latency MC1 CHA R3 [Auto]
    Round Trip Latency MC1 CHA R4 [Auto]
    Round Trip Latency MC1 CHA R5 [Auto]
    Round Trip Latency MC1 CHA R6 [Auto]
    Round Trip Latency MC1 CHA R7 [Auto]
    Early Command Training [Auto]
    SenseAmp Offset Training [Auto]
    Early ReadMPR Timing Centering 2D [Auto]
    Read MPR Training [Auto]
    Receive Enable Training [Auto]
    Jedec Write Leveling [Auto]
    Early Write Time Centering 2D [Auto]
    Early Read Time Centering 2D [Auto]
    Write Timing Centering 1D [Auto]
    Write Voltage Centering 1D [Auto]
    Read Timing Centering 1D [Auto]
    Dimm ODT Training* [Auto]
    Max RTT_WR [ODT Off]
    DIMM RON Training* [Auto]
    Write Drive Strength/Equalization 2D* [Auto]
    Write Slew Rate Training* [Auto]
    Read ODT Training* [Auto]
    Comp Optimization Training [Auto]
    Read Equalization Training* [Auto]
    Read Amplifier Training* [Auto]
    Write Timing Centering 2D [Auto]
    Read Timing Centering 2D [Auto]
    Command Voltage Centering [Auto]
    Early Command Voltage Centering [Auto]
    Write Voltage Centering 2D [Auto]
    Read Voltage Centering 2D [Auto]
    Late Command Training [Auto]
    Round Trip Latency [Auto]
    Turn Around Timing Training [Auto]
    CMD CTL CLK Slew Rate [Auto]
    CMD/CTL DS & E 2D [Auto]
    Read Voltage Centering 1D [Auto]
    TxDqTCO Comp Training* [Auto]
    ClkTCO Comp Training* [Auto]
    TxDqsTCO Comp Training* [Auto]
    VccDLL Bypass Training [Auto]
    CMD/CTL Drive Strength Up/Dn 2D [Auto]
    DIMM CA ODT Training [Auto]
    PanicVttDnLp Training* [Auto]
    Read Vref Decap Training* [Auto]
    Vddq Training [Auto]
    Duty Cycle Correction Training [Auto]
    Rank Margin Tool Per Bit [Auto]
    DIMM DFE Training [Auto]
    Tx Dqs Dcc Training [Auto]
    Rank Margin Tool [Auto]
    Memory Test [Auto]
    DIMM SPD Alias Test [Auto]
    Receive Enable Centering 1D [Auto]
    Retrain Margin Check [Auto]
    Write Drive Strength Up/Dn independently [Auto]
    Margin Check Limit [Disabled]
    tRDRD_sg_Training [Auto]
    tRDRD_sg_Runtime [7]
    tRDRD_dg_Training [Auto]
    tRDRD_dg_Runtime [4]
    tRDWR_sg [12]
    tRDWR_dg [12]
    tWRWR_sg [7]
    tWRWR_dg [4]
    tWRRD_sg [38]
    tWRRD_dg [28]
    tRDRD_dr [12]
    tRDRD_dd [14]
    tRDWR_dr [16]
    tRDWR_dd [18]
    tWRWR_dr [12]
    tWRWR_dd [12]
    tWRRD_dr [10]
    tWRRD_dd [10]
    tWRPRE [45]
    tPRPDEN [Auto]
    tRDPDEN [Auto]
    tWRPDEN [Auto]
    tCPDED [Auto]
    tREFIX9 [135]
    Ref Interval [Auto]
    tXPDLL [Auto]
    tXP [Auto]
    tPPD [Auto]
    tCCD_L_tDLLK [Auto]
    MRC Fast Boot [Enabled]
    MCH Full Check [Enabled]
    Mem Over Clock Fail Count [Auto]
    Training Profile [Standard Profile]
    RxDfe [Auto]
    Mrc Training Loop Count [Auto]
    DRAM CLK Period [Auto]
    Controller 0, Channel 0 Control [Enabled]
    Controller 0, Channel 1 Control [Enabled]
    Controller 1, Channel 0 Control [Enabled]
    Controller 1, Channel 1 Control [Enabled]
    MC_Vref0 [Auto]
    MC_Vref1 [Auto]
    MC_Vref2 [Auto]
    Dynamic Memory Boost [Disabled]
    Realtime Memory Frequency [Disabled]

  6. #16
    ROG Guru: Yellow Belt Array
    Join Date
    Dec 2013
    Reputation
    19
    Posts
    196

    Strix z690 A d4 bios 812

    Testing 4x16 3600c14

    I didnt do a long memory test as if no one is interested I am not going to spend the time. CMO should work for 4x8 also. You could bump up speed for 4x8 I would think to 3866+. Havent tested but I do have a 4x8 I could test but wont as if 4x16 can do this I know 4x8 can do more easy.

    Also before bios 812(tested 003, 707, 803, 808) I would get cashes at idle/low load if using AI oc. To fix need to set static v core voltage. No isssue like that with 812.

    If someone want to test cmo file let me know and I will make one and post

    Edit I am using 2 pair of mismatched ram kits of 4000c14 and 3600c14 so this is not ideal and still works.

    Click image for larger version. 

Name:	3600c14 4x16.png 
Views:	220 
Size:	85.6 KB 
ID:	91119Click image for larger version. 

Name:	4x16.png 
Views:	21 
Size:	724.5 KB 
ID:	91120Click image for larger version. 

Name:	4x16 3600c14 y crunch.png 
Views:	9 
Size:	750.4 KB 
ID:	91121
    Last edited by bscool; 12-18-2021 at 11:38 AM.

  7. #17
    ROG Guru: Yellow Belt Array
    Join Date
    Dec 2013
    Reputation
    19
    Posts
    196

    z690 Strix A d4 bios 812
    2x16 b die 4133c15

    Click image for larger version. 

Name:	4133c15 812.png 
Views:	25 
Size:	606.9 KB 
ID:	91122Click image for larger version. 

Name:	4133c15 812.png 
Views:	220 
Size:	85.5 KB 
ID:	91123

  8. #18
    ROG Guru: Orange Belt Array bass junkie xl PC Specs
    bass junkie xl PC Specs
    MotherboardZ790 Asus Strix D4 Bios 801 / Strix z690 D4 Bios 1504
    Processor13900k @ 5.8 P/4.5 E/5.0 R @1.30v - 12900 Ks @ 5.4/5.1 ring @ 1.36v
    Memory (part number)DDR4 32GB @ 4300 c15-16-16-32 Gear 1
    Graphics Card #1RTX 4090 Gigabyte OC
    Graphics Card #2STRIX GTX 1080 TI
    Graphics Card #3MSI Gtx 1080 Ti + 360m aio @ 2000 mhz + 300 mem
    Sound CardMotherboard Realtec , Driver 87.46
    MonitorAsus Xg27AQM 27" @270 hz / Asus PG279Q 27" @165 HZ / AOC AG251FZ2 1080P @240hz
    Storage #1XPG 2TB/Samsung 970 evo+ 500 Gb / 970 Evo 1TB x 2
    Storage #22 tb HDD x 4
    CPU CoolerArtic liquid freezer 420mm / Deep Cool Gamermaxx 360mm v2 / Kraken G12 s36 360mm
    CaseThermaltake View 71 full Glass
    Power SupplyEvga 1000w Platnuim / evga 750 w
    Keyboard Corsair K95 Platnuim RGB
    Mouse Corsair Night Sword RGB
    Headset Razer Kraken 7.1 chroma
    Mouse Pad Asus Sheeth Large
    Headset/Speakers Logitech Z-5500 THX 5.1
    OS Windows 10-21h1 x64 Pro
    bass junkie xl's Avatar
    Join Date
    Oct 2017
    Reputation
    43
    Posts
    372

    Quote Originally Posted by bscool View Post
    z690 Strix A d4 bios 812
    2x16 b die 4133c15

    Click image for larger version. 

Name:	4133c15 812.png 
Views:	25 
Size:	606.9 KB 
ID:	91122Click image for larger version. 

Name:	4133c15 812.png 
Views:	220 
Size:	85.5 KB 
ID:	91123

    vary nice.

    I just got my Asus Strix z690 ddr4 board and 12900k

    I have 8gb x 4 sticks of team group extreme 4133 MHz
    cl-18-18-81-38 @ 1.40v xmp

    @ 4000 MHz cl 17--17-17-37 @ 1.45v manual rest auto

    bios 807 .

    my question is where can get bios 812 ?,

    is bios 812 better then bios 807 for 8gb x4 from the Asus support page bios d/l ?

    this ram is @ 4133 MHz cl 16-16-16-36 1.50v doing 37 NS with my 9900 ks @ 5.2 GHz in a cheap gigabyte z390 pro wifi stable in evrything.

    4000 cl 17 boots in gear 1 and 4133 cl 18 boots in gear 1
    13900k @5.8 P | 4.5 E | 5.1 R | @1.35v | 32GB DDR4 @4300 c-15-16-16-32 @ G1 | RTX 4090 | 27" 1440p 270Hz G-Sync

  9. #19
    ROG Guru: Yellow Belt Array
    Join Date
    Dec 2013
    Reputation
    19
    Posts
    196

    For me it is the best bios by far, allows for much lower sa/vddq with dual rank b die. i didnt test the others on 4 sticks so I have no idea how they do.

    812 https://www.dropbox.com/s/t1m4s5mzc6...-0812.rar?dl=0

    source https://rog.asus.com/forum/showthrea...ge6#post850613

    I think if you can get anything over 3866 you are doing good with 4x8. Depends on subtiming and IMC also. Might be able to run 4000 to 4133 with looser timings.
    Last edited by bscool; 12-18-2021 at 11:35 AM.

  10. #20
    ROG Guru: White Belt Array phatmonkey PC Specs
    phatmonkey PC Specs
    MotherboardRog Maximus Hero Z690
    Processori9 12900k
    Memory (part number)Corsair LPX Vengenace DDR5 4 x 16GB 4800mhz
    Graphics Card #1MSI RTX 3090 Suprim X
    Sound CardRealtek / Quantum 2626 / Foccusrite 18i20 3rd Gen
    MonitorPredator Z35
    CPU CoolerCorsair H150i RGB Pro XT
    CaseCorsair 900D
    Power SupplyCorsair AX1200
    Keyboard Corsair K100 RGB
    Mouse Corsair Darkcore Pro SE
    Headset Audiotechnica M50X
    Mouse Pad Razzer thingy
    OS Windows 11 Pro 64bit
    phatmonkey's Avatar
    Join Date
    Mar 2018
    Reputation
    10
    Posts
    94

    Quote Originally Posted by emmarshall71 View Post
    Hello everyone,

    I am running a Windows 11 Professional build with a 12700K CPU and 64 GB of GSKILL F4-3600C16Q-16GTZR memory on the STRIX Z690-A board. This memory ran fine on my Maximus Hero XII Z490 board on XMP settings. I am running the latest 0807 BIOS and have had the same issue on the prior two BIOS versions. If I try either XMP 1 or XMP 2 windows fails to boot and collects error messages to send to Microsoft. I have also tried this with the CPU Overclock jumper set to both on and off. Also I noticed that setting XMP II, but setting the DRAM to 3400 allows Windows to boot and run fine, but anything higher will crash windows.


    Any help would be greatly appreciated. First time I am running into this issue after years of building on ASUS boards.
    I am having the same problem Hero z690 with a 12900 on Windows 11 bios 803 with 64g DDR5 Corsair Vengeance 4800, XMP works fine until I play a game then 10 mins in the game crashes, under ram timings I also tried mode 1 and 2 as this has helped in the past on prior motherboards but not luck. XMP 2 does not work for me it blue screens. Everything is stable with XMP off, I noticed some Reddit posts are popping up with this issue on Asus boards also, something funky is going on.

    UPDATE: XMP1 at 4266mhz is stable, best game to trigger errors quickly is Watch Dogs Legion.
    Last edited by phatmonkey; 12-21-2021 at 10:47 AM.

Page 2 of 4 FirstFirst 1 2 3 4 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •