Results 31 to 40 of 66
-
02-04-2022 02:01 AM #31
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 9
After bios update 1003, I was able to boot into Windows with XMP I/II profiles of 6000Mhz CL36 4x16GB but would get an error while benchmarking Rise of the Tomb Raider, I have everything maxed out and a resolution of 5120x1440, 240Hz max with vsync off.
I started messing around with the manual VDD and VDDQ but left everything else on auto, current tweaks are:
6000MHz
40-40-40-76 (auto)
VDD: 1.325
VDDQ: 1.325
I tested VDD and VDDQ from 1.260 all the way to 1.325 going up 0.005 every time for each voltage simultaneously. Bios memtest would crash almost right away but until I was able to get at least 30 minutes in, I would then run the benchmark and that would crash after 2 scenes; until I got to 1.325V. I know this is not the best stress test, but at least I am better off than I was a week ago not being able to boot passed 5200MHz.
Just to stir in more commotion, one kit is from Newegg and the other kit is from Amazon with slightly different part numbers, but GSkill has confirmed they are the same specs (not bins, obviously). By same specs, I mean frequency, latency, and voltage.
On another note, I was able to pick up a set of Corsair Dominator 2x32GB 5200MHz CL40 and cannot get anything to boot passed other than the default 4000MHz, I did notice that these are not on Asus' list, though the lower latency ones are. Very strange. I will be returning them, such a disappointment, especially for the price. They do look and feel very nice compared to the GSkill. VERY solid heatsinks.
I am planning on running more test but when I have a lot more time. For now, I will enjoy the "win".
Good luck out there!
-
02-10-2022 10:19 AM #32
- Join Date
- Sep 2020
- Reputation
- 10
- Posts
- 3
Issues since new Bios 1003
Followed the thread as I also run 2x16GB Gskill 6000/36 with Z680 Formula.
I was always able to boot with XMPI or II without issues. But since Bios 1003 I get Game crashes constantly, so almost all games just crash after 5-10 minutes gameplay. Mostly without error description, some with DX issues.
I now have dieled back momory frequency to 5800 and all seem to work again ( So I kept XMPI setting just dialed back frequency by 200MHz)
Verry strange...
-
02-18-2022 01:27 AM #33
Braegnok PC Specs Motherboard Asus ROG Maximus Z690 Apex Processor Intel Core i9-12900K Memory (part number) CMT32GX5M2X6600C32 Graphics Card #1 Nvidia RTX 3090 FE Monitor Asus Swift PG32UQX Storage #1 2TB Seagate FireCuda 530 SSD Storage #2 4TB Seagate FireCuda 120 SSD CPU Cooler EK-Quantum Velocity2 Case TT A700 TG Power Supply Corsair AX1600i Keyboard Das Keyboard 4 Ultimate Mouse G502 Lightspeed Headset SteelSeries Arctis Pro OS Windows 11 Pro
- Join Date
- Nov 2019
- Reputation
- 28
- Posts
- 319
I have the Corsair Micron 2x32GB 5200MHz CL40, Dell SK Hynix 2x32GB 4800MHz kits and both are working fine in XMP 1 profile on Apex board.
Not sure which motherboard you have, I have tested the memory preset profiles in BIOS for 2x32GB Micron, Hynix and the pre-set profiles also work fine.
Corsair 5200 kit:
Dell 4800 Kit:
Last edited by Braegnok; 02-20-2022 at 12:22 PM.
-
02-21-2022 12:25 AM #34
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 22
XMP Woes
Joining the party. I’ve navigated through a lot to finally get windows to boot and have a computer that’s somewhat stable but when it starts performing multiple tasks, or even run warzone, windows freezes and it’s because my RGB freaks out. I believe it has something to do with the stability of my trident z5 6000 c40. I’ve dropped as low as 5000MHz and still freeze. Im on the latest bios and will try your settings. I have the formula with a 12900k and a 3090.
-
02-22-2022 09:09 AM #35
AwenMilano PC Specs Motherboard Asus Z690 Hero Processor I7 12700 KF Memory (part number) G.Skill F5-6000J3636F16GX2-TZ5RK Graphics Card #1 MSI RTX 3080 Ti Suprim X Monitor Asus XG 279Q Storage #1 WD Black SN850 2Tb Storage #2 Team Delta Max 1Tb CPU Cooler Asus Ryujin II 360 Case Cooler Master Cosmos C700M Power Supply Seasonic PX-1000 Keyboard Razer Blackwidow Chroma Overwatch Mouse Corsair Scimitar Headset Steelseries Artics 7 Mouse Pad Razer Manticor Headset/Speakers Swans Hivi M50W OS Windows 11 Education
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 20
join the boat,
i have z690 hero board, with newest bios 1003
i7 12700kf
asus ryujin ii 360
g.skill 6000 cl36 16x2
msi rtx 3080ti suprim x
nvme wd black sn850 2tb
hdd wd black 4tb
hdd seagate baracuda 8tb
cooler master cosmos c700m
psu msi 850w gold
since buy at dec 21 this build always problematic.
at first i have g.skill f5-6000u3636e16gx2 tz5rk
if xmp off all running fine, but if xmp 1 or 2 on will experince game crashing under 10 min randomly
trying use hyperpi and soo much error come out. and i return that ram to seller.
they offering me to change taht ram to f5-6000j3636f16gx2 tz5rk with i add some extra cash to them because a diffrend price.
ia ccept it, after few days ram came and i try use it
xmp off is stable no crash
xmp1 on is slightly unstable hyperpi can pass 2 times in 8 times testing, memorytest86 pass mem.controler in 1.298v auto
play game will random crash but take more time than before, its about before 1 hour, sometimes can reach 1 hour.
xmp2 on is very unstable, because mem.controler only give it 1.101v. play game crash in under 3min. memtest86 error under 2min
and i try to xmp1 on and i increase mem.controller to 1.37500. it will read 1.368v at the system. beside that all default.
day 1 with this setting play game is fine. try use hyperpi is pass too.
but at day 3 it was crash again. this is frustating me soo hard. anyone can help?
or can this issue fix by next bios release?
-
02-22-2022 09:18 AM #36
-
02-22-2022 01:15 PM #37
AwenMilano PC Specs Motherboard Asus Z690 Hero Processor I7 12700 KF Memory (part number) G.Skill F5-6000J3636F16GX2-TZ5RK Graphics Card #1 MSI RTX 3080 Ti Suprim X Monitor Asus XG 279Q Storage #1 WD Black SN850 2Tb Storage #2 Team Delta Max 1Tb CPU Cooler Asus Ryujin II 360 Case Cooler Master Cosmos C700M Power Supply Seasonic PX-1000 Keyboard Razer Blackwidow Chroma Overwatch Mouse Corsair Scimitar Headset Steelseries Artics 7 Mouse Pad Razer Manticor Headset/Speakers Swans Hivi M50W OS Windows 11 Education
- Join Date
- Dec 2021
- Reputation
- 10
- Posts
- 20
-
02-22-2022 02:58 PM #38
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 22
so, I’ve ordered another set of trident z5 6000 c40 but these are J’s instead of U’s. I’m hoping they aren’t Samsung… I’m hoping they run stable. I tried last night with the ones I have at 6000, 5600, and even 5000MHz at VDD/VDDQ/VDDTX/MC at 1.35 and SA at 1.25. No luck. As soon as I launch a game computer freezes and I have to restart. Again everything is stock except for 12900k v cache at -50mV offset for temperature purposes.
-
02-24-2022 10:28 PM #39
Cutsman PC Specs Motherboard ASUS ROG MAXIMUS Z690 HERO Processor Intel Core i7 12700K @ 5.2 GHz Memory (part number) F5-6000U3636E16GX2-TZ5RK Graphics Card #1 ASUS TUF Gaming GeForce RTX 3070 Ti OC Edition Monitor ASUS TUF Gaming VG259QM Storage #1 Samsung 980 PRO 500 GB Storage #2 Samsung 980 PRO 1 TB CPU Cooler NZXT Kraken X73 RGB Case NZXT H710i Power Supply NZXT C850 Gold Keyboard SteelSeries Apex Pro Mouse SteelSeries Rival 5 Headset SteelSeries Arctis 7 Mouse Pad Razer Strider OS Windows 11 Pro Network Router ASUS RT-AX88U
- Join Date
- Jan 2017
- Reputation
- 10
- Posts
- 18
I am oddly enough happy to read the posts in this thread as I too am now in this boat where games are crashing without any good explanation. Lost Ark closing flat out or Windows throwing random memory related blue screens. Memtest ran clean with XMP on earlier. No corruption found in Windows 11. So I removed all XMP, left it at manual stock 4800 with AIOC running. Now it's stable. I might jump back in and up the speeds later this week when I've got more spare time to tweak. It's just a bummer to see a G.Skill DDR5 16x2 kit rated for 6000/CL36 not actually be able to operate at that stable.
Edit: As others have mentioned, XMP1 clocked down to 5800 seems to be stable.Last edited by Cutsman; 02-25-2022 at 03:35 PM.
| Intel Core i7 12700K @ 5.3 GHz | G.SKILL 2x16 GB DDR5 @ 6000 MHz CL36 | ASUS ROG MAXIMUS Z690 HERO | ASUS TUF Gaming GeForce RTX 3070 Ti OC Edition |
-
02-26-2022 07:03 AM #40
- Join Date
- Apr 2018
- Reputation
- 10
- Posts
- 1
Having also joined this boat just today I'm wondering Cutsman what you (or anyone else) is using to test stability?
Is it just the inbuilt Memtest or are you running someone else? Or maybe just using the machine...
I've never really OC'd before - I usually just tell the PC to use XMP and to automatically boost the CPU but I did buy those DDR5 6000 G.Skill modules for a reason.
Any help appreciated.
TonyG