Hi guys,
I have a new system build specs are
- CPU: 10900k
- Mobo: Z590 Extreme
- Storage: x2 980 Nvme (installed on M.2_1 and M.2_2)
BIOS is updated to 1202
I am trying to create a RAID 0 and install the OS on it
I tried everything inside the BIOS and read a lot of resources but still cannot figure out why Intel Rapid Storage doesnt see my x2 Nvme drives
I will try to walk you over my BIOS setup to see what I am doing wrong.
1- Advanced\Onboard Devices Configuration
> CPU PCIE Configuration Mode is set to "PCIEX16_1 + M.2_1 + M.2_2"
here the system read both Nvme inside
2- Advanced\PCH Storage Configuration
SATA Mode Selection is set to "Intel RST Premuim With Intel Op..."
--- I can see both Nvme when I go to Advanced\NVMe controller and Drive information
but when I goto Advanced\Intel(R) Rapid Storage Technology
it shows (RST 18.31.1.5256 RAID Driver)
No disks connected to system
I hope someone can help me diagnose the issue here, thanks in advance.