Results 1 to 10 of 19
Hybrid View
-
01-17-2022 10:44 PM #1
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 9
Asus Rog Strix x 570 E-gaming. The video card does not start in PCIe 4.0 mode
Last edited by smuglyi_aa; 01-18-2022 at 07:49 PM.
-
01-18-2022 09:02 PM #2
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 9
Why is my question being ignored on the forum?
-
01-18-2022 09:19 PM #3
Ribellu PC Specs Motherboard Asus Maximus Z690 HERO Processor I7 12700KF Memory (part number) Corsair Vengeance DDR5 2X16Gb 5200Mhz 38/38/38/74 Graphics Card #1 Asus ROG-STRIX-RTX3080TI-O12G-GAMING Monitor Asus VG27AQ Storage #1 SSD Samsung 970 EVO Plus 1T Storage #2 SSD Samsung 960 EVO 500gb CPU Cooler MSI MAG CoreLiquid C240 Case Thermaltake Commander C31 TG Power Supply Corsair HX850 Keyboard Razer Huntsman Tournament Edition Mouse Razer Bazilisk V2 Headset/Speakers Hyper X Cloud Alpha OS Windows 10 Pro 21H2
- Join Date
- Dec 2021
- Reputation
- 65
- Posts
- 102
I don't know what to answer you, I made a post almost similar to yours about a 3080Ti Strix connected with a Display Port cable, but no one answered me, I no longer have access to the BIOS when I start my PC, I arrive directly on the desktop, I read that there were problems with certain 30 series cards and the Display Port and the CSM in the BIOS. Even by rebooting my PC from Windows for the next boot to the BIOS it does not work, I have to connect an HDMI cable, to be able to access the BIOS again.
EDIT: I open a ticket at support coz here sadly nobody answer...Last edited by Ribellu; 01-18-2022 at 09:21 PM.
-
01-31-2022 03:52 PM #4
- Join Date
- Jul 2013
- Reputation
- 33
- Posts
- 70
Did you try this update?
https://nvidia.custhelp.com/app/answ...ail/a_id/5233/
There is also an update for older gen cards:
https://www.nvidia.com/en-us/drivers...fi-update-x64/
But OPs problem seems different...
I would first try to update to the latest bios.
If that doesn't work, turn back the Memory/Fabric overclock.
The Bios literally gives a Info Message that fabric overclock can cause PCIE4 instability.
If it does boot with no memory/fabric overclock, enable the overclock again and try to raise vsoc voltage?
-
02-01-2022 04:17 PM #5
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 9
Last edited by smuglyi_aa; 02-01-2022 at 04:21 PM.
-
02-02-2022 03:02 PM #6
- Join Date
- Jul 2013
- Reputation
- 33
- Posts
- 70
Last edited by schm0; 02-02-2022 at 03:04 PM.
-
02-02-2022 07:24 PM #7
Ribellu PC Specs Motherboard Asus Maximus Z690 HERO Processor I7 12700KF Memory (part number) Corsair Vengeance DDR5 2X16Gb 5200Mhz 38/38/38/74 Graphics Card #1 Asus ROG-STRIX-RTX3080TI-O12G-GAMING Monitor Asus VG27AQ Storage #1 SSD Samsung 970 EVO Plus 1T Storage #2 SSD Samsung 960 EVO 500gb CPU Cooler MSI MAG CoreLiquid C240 Case Thermaltake Commander C31 TG Power Supply Corsair HX850 Keyboard Razer Huntsman Tournament Edition Mouse Razer Bazilisk V2 Headset/Speakers Hyper X Cloud Alpha OS Windows 10 Pro 21H2
- Join Date
- Dec 2021
- Reputation
- 65
- Posts
- 102
-
01-24-2022 11:04 AM #8
comfuzio13 PC Specs Laptop (Model) Steam Deck 512GB Motherboard ROG Strix x570-E Gaming Processor Ryzen 9 5900x Memory (part number) CMW32GX4M2C3466C16 Graphics Card #1 Colorful GeForce RTX 3080 Ti 12GB iGame Vulcan OC-V Monitor Odyssey G7 Gaming 27" 1440p 240hz Storage #1 Samsung 970 Evo Plus 1TB Storage #2 Samsung 840 256GB CPU Cooler Noctua NH-D15 Case Lian Li PC-O11 Dynamic XL ROG Power Supply Corsair HX Series HX1200 1200W Keyboard EVGA Z20 Mouse Corsair Scimitar PRO RGB Headset HyperX Cloud Flight S Wireless Gaming Headset Headset/Speakers 5.1 Ch Soundbar Q60T OS Windows 11 x64 Pro / Manjaro KDE Network Router RT-AX92U
- Join Date
- Oct 2019
- Reputation
- 22
- Posts
- 73
I have the same mobo with 3900x and the 3080 ti from colorful, I am also using the DP to my monitor and I do not face such a problem.
I have the 4021 bios which I did clean install, loaded optimized defaults, then DOCP and enabled PBO.
After that I have enabled the resizable bar (I had it off because my previous GPU 1660 ti didn't support it). The PCIEX16_1 I have it on auto as a setting.
For me, I do not have any issues of this kind, I do get though from time to time cold boot error 8d and the system won't post.
-
01-24-2022 05:43 PM #9
- Join Date
- Dec 2013
- Reputation
- 22
- Posts
- 35
This forum is quite terrible TBH, best going somewhere like Guru3d, people will answer and actually help, they know a thing or two and it's quite active as well.
-
01-31-2022 02:48 PM #10