Results 1 to 10 of 16
-
01-25-2022 09:03 AM #1New ROGer Array
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 19
CORSAIR DOMINATOR PLATINUM DDR5 5600Mhz DOESN'T WORKS WITH Z690 EXTREME (SLI neither)
I can't use XMP 1 or XMP 2, hte computer only starts with "AUTO" setting. What can i do? (with this motherboard i have the problem with SLI/NVLINK that it can't be enabled and NOW the XMP with a Corsair RAM). Whats is happen with this expensive z690 extreme motherboard?... everything are problems... i'm with BIOS 811 (latest) and the problems persists...
Last edited by beryl; 01-25-2022 at 09:07 AM. Reason: remarking all the problems with this expensive mobo
-
01-26-2022 03:28 AM #2TeamROG Moderator Array xeromist PC Specs
xeromist PC Specs Laptop (Model) Dell Inspiron 15 7567 Motherboard MSI x470 Gaming Plus Processor AMD 2600X Memory (part number) 16GB Crucial Ballistix Elite 3600 Graphics Card #1 ASUS GTX 1080 Strix Monitor BenQ BL3200PT Storage #1 Intel 600p NVMe CPU Cooler Wraith Case custom Antec 900 Power Supply Corsair HX1000 Keyboard Logitech Orion Spark Mouse Logitech MX500 Headset Plantronics 777 with Oregon Aero upgrade 
- Join Date
- Jul 2010
- Reputation
- 367
- Posts
- 8,343
Yes, from what I can tell that memory is not on the QVL and not supported at the rated speed.
* Support disease research with Folding@Home *
< < < Click the drop-down above my avatar for my PC specs!
-
01-26-2022 03:55 AM #3ROG Guru: Orange Belt Array rjbarker PC Specs
rjbarker PC Specs Motherboard Maximus Z690 Apex BIOS 0811 Processor 12900K w EK Velocity 2 Memory (part number) 32 GB DDR5 - Dominator 5600 / Cl36 Graphics Card #1 Evga RTX 3080Ti FTW3 Ultra w EK Vector Sound Card Onboard USB Realtek Monitor Dell Alienware 34" Ultra wide 120Hz Gsync Storage #1 Samsung 980 Pro 512G M.2 NVMe Storage #2 Samsung 980 Pro 1 TB M.2 NVMe CPU Cooler EK Velocity 2 Case Corsair 900D Power Supply Corsair AX 1600i OS W11 HP x64 - 21H1 Accessory #1 480 * 360 * 240 XSPC Radiators (15 Fans) w 4 Channel 200W Fan Controller Accessory #2 XSPC Photon Rez / Vario Pump combo Accessory #3 Fesser Flex Tubing - Bits Power Fittings & EK SLi Terminal
- Join Date
- May 2013
- Reputation
- 49
- Posts
- 406
Im using that same kit Dominator 5600 C36 (Samsung) and it runs great on my Apex Bios 0811.....
Presently have it running 6000 C36....
Try bumping up your VDD / VDDQ / VDDQ Transmitter / Memory Controller n SA...check out this very simple guide (section on Memory)....
https://rog.asus.com/forum/showthrea...clocking-GuidePort Royal: 15,018 https://www.3dmark.com/pr/1411187
Time Spy: 22,118 https://www.3dmark.com/spy/25792262
Fire Strike Extreme: 25,542 https://www.3dmark.com/fs/26964846
-
01-26-2022 05:15 PM #4New ROGer Array
- Join Date
- Nov 2021
- Reputation
- 10
- Posts
- 9
hi Beryl, the Extreme is an extreme disappointment. Cheap capacitors, convoluted and congested VRM design, and numerous memory problems (yes, the Asus Z690 memory QVL is an extreme joke! All kits 6000 and above have intermittent cold boot Memtest failures, at least the G.Skill, Corsair, and T-Force ones I tried).
Originally Posted by beryl
If you can return the Extreme, Â*do so. Get an Apex instead. Great board, and the memory support is a lot better given its 2 DIMM design. Also, higher quality components.Â*
-
01-27-2022 05:55 PM #5New ROGer Array
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 19
the last chance
I'm going to test the 1003 BIOS... if the problem continues, for sure i'll return it... SLI(NVLINK) doesn't works... DDR5 5.600 doesn't work... let me check the new BIOS version...
-
01-27-2022 07:25 PM #6New ROGer Array
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 19
Corsair Dominator DDR5 5600 continue not working with 1003 BIOS version
Going to Return this... Corsair Dominator DDR5 5600 not working with XMPI or XMPII profiles...
-
01-28-2022 02:49 AM #7ROG Guru: Orange Belt Array rjbarker PC Specs
rjbarker PC Specs Motherboard Maximus Z690 Apex BIOS 0811 Processor 12900K w EK Velocity 2 Memory (part number) 32 GB DDR5 - Dominator 5600 / Cl36 Graphics Card #1 Evga RTX 3080Ti FTW3 Ultra w EK Vector Sound Card Onboard USB Realtek Monitor Dell Alienware 34" Ultra wide 120Hz Gsync Storage #1 Samsung 980 Pro 512G M.2 NVMe Storage #2 Samsung 980 Pro 1 TB M.2 NVMe CPU Cooler EK Velocity 2 Case Corsair 900D Power Supply Corsair AX 1600i OS W11 HP x64 - 21H1 Accessory #1 480 * 360 * 240 XSPC Radiators (15 Fans) w 4 Channel 200W Fan Controller Accessory #2 XSPC Photon Rez / Vario Pump combo Accessory #3 Fesser Flex Tubing - Bits Power Fittings & EK SLi Terminal
- Join Date
- May 2013
- Reputation
- 49
- Posts
- 406
^^^^ Are you trying to run a single 32G (2*16G) kit or 64G (2 of those kits together)? If the latter that would definitely be a problem.
With a single kit, have you tried:
1. Allowing Bios to load defaults 4800 Mhz then run Memtest.
2. With XMP 1 loaded try VDD 1.275v / VDDQ 1.275v / VDDQ Transmit 1.275v / SA 1.25v / MC 1.3v
3. Try any of the pre-loaded Asus Memory Profiles (Samsung as thats what that kit is)
I very much doubt there is anything wrong with that Memory, as said its Samsung....the previous Dominator kits were Micron.
Good luck...let us know how you make out with above.Port Royal: 15,018 https://www.3dmark.com/pr/1411187
Time Spy: 22,118 https://www.3dmark.com/spy/25792262
Fire Strike Extreme: 25,542 https://www.3dmark.com/fs/26964846
-
01-28-2022 10:53 PM #8ROG Guru: Orange Belt Array Braegnok PC Specs
Braegnok PC Specs Motherboard Asus ROG Maximus Z690 Apex Processor Intel Core i9-12900K Memory (part number) F5-6400J3239G16GX2-TZ5K Graphics Card #1 Nvidia RTX 3090 FE Monitor Asus Swift PG32UQX Storage #1 2TB Seagate FireCuda 530 SSD Storage #2 4TB Seagate FireCuda 120 SSD CPU Cooler EK-Quantum Velocity2 Case TT A700 TG Power Supply Corsair AX1600i Keyboard Das Keyboard 4 Ultimate Mouse G502 Lightspeed Headset SteelSeries Arctis Pro OS Windows 11 Pro 
- Join Date
- Nov 2019
- Reputation
- 28
- Posts
- 306
+1 Originally Posted by rjbarker
Use the guide bump up VDD / VDDQ / VDDQ Transmitter / Memory Controller,..
Update BIOS to version 1101 release date 01/28/2022 from Asus Support,.. than you will have SLI key.
I'm running 1101 BIOS release date 01/26/2022 is latest beta version.
Basically with latest BIOS/microcode everything related to memory is much better.Last edited by Braegnok; 01-29-2022 at 03:31 AM.
-
01-30-2022 03:33 AM #9New ROGer Array
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 19
Still not working
Thanks for your help guys… i’ve done everything you’d said but the XMP profile or 5600mhz speed are not working (even raising up the volts)… try with only 2 modules and nothing… only works with AUTO (i think is jedec ay 4800)… Originally Posted by Braegnok
+1
Use the guide bump up VDD / VDDQ / VDDQ Transmitter / Memory Controller,..
Update BIOS to version 1101 release date 01/28/2022 from Asus Support,.. than you will have SLI key.
I'm running 1101 BIOS release date 01/26/2022 is latest beta version.
Basically with latest BIOS/microcode everything related to memory is much better.
I don’t know what to do… i’ll do the rma and try to catch a QVL module…
-
01-31-2022 09:05 PM #10New ROGer Array
- Join Date
- Jan 2022
- Reputation
- 10
- Posts
- 19
Fixed bu new ram - question for 1 kit of two sticks
Hi guys, i’ve found a Kingston DDR5 Fury kit and WORKS GREAT with XMP. My question, what i have to do to fill the slot for dual channel? Or the better configuration? It’s a kit with two 16MB slot.
In the manual Said: there are these slots: Dimm a1 Dimm a2 Dimm b1 Dimm b2 and said that for Two kit stick the best setup is to fill DIMM A2 DIMM B2 (the second and fourth slot contingente from left to right). Is it correct? Y
Reply With Quote
