Have mentioned this in the Armoury Crate sticky a couple of weeks ago but no movement despite a number of updates since.
Have noticed an issue with this Z690 Hero and FanXpert - and it's remained despite a full OS reinstall and all the latest updates to the Crate and the motherboard components.
When plugging devices into either or both the W_Pump+ and AIO_Pump headers on the board, both can be fully independently tuned and monitored inside the UEFI's Q-Fan/Monitoring section exactly as expected.
However, inside Armoury Crate/FanXpert, the speed controls are transposed: A pump (or fan) connected to the AIO Pump header will display its rotation speed inside the AIO Pump section, as expected. However, it is necessary to adjust the fan cuve in the W_PUMP+ section to change the performance of the AIO_Pump header.
Equally, when a device connected to the W_PUMP+ header, it needs to have its speed adjusted via the AIO Pump section's speed curve.
This is obviously confusing to the user - and also seems to make a mess of FanXpert's automated fan tuning algorithm if a pump/fan is connected to either header.
Anyone else experiencing the same, and if so, how best to report to Asus?