Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Z390-E Gaming strix bios 2004 will not post

Laurent0717
Level 7

‎04-18-2022 12:39 AM

from 1302 and up windows 10 will not post i am using corsair dominator platinum CMT32GX4M4C300C15 i get yellow then red lights back and forth untill it posts to bios safe mode i have to press f1 and set xmp for it to post to windows what thee actual is going on?
anyone could maybe please explain that would be great i am stuck on bios 1105 it is 3000mhz ram
Labels:
0 Kudos
2,448 Views
10 REPLIES 10

Erwin05
Level 10

‎04-18-2022 01:15 AM

Hello,

Your memory number is CMT32GX4M4C3000C15.

Can you try with minimal I/O devices connected? And always press F5 after flasing a new bios.

https://rog.asus.com/forum/showthread.php?108927-z390-i-how-come-sometimes-my-PC-gets-stuck-at-this-...
0 Kudos

Laurent0717
Level 7
In response to Erwin05

‎04-18-2022 01:22 AM

all i have connected is my keyboard mouse webcam and speakers display thank you for the reply i did set defaults too and would not post only to setup or error screen
0 Kudos

Erwin05
Level 10

‎04-18-2022 01:27 AM

Hello,

Only plug in your keyboard and mouse, monitor, 1 ssd with os and 1 memory stick in the 2nd slot from the left next to the cpu.

What is the error?
0 Kudos

Laurent0717
Level 7
In response to Erwin05

‎04-18-2022 01:34 AM

i had the mem ok button on when i flashed it to 2004 and i flashed back to 1105 not sure if it was an error but i brought me to the f1 screen saying that it didnt post due to may have not that is due to instability that i should hit f1 to run setup did the mem ok being on screw things up?
0 Kudos

Erwin05
Level 10
In response to Laurent0717

‎04-18-2022 01:49 AM

Laurent0717 wrote:
i had the mem ok button on when i flashed it to 2004 and i flashed back to 1105 not sure if it was an error but i brought me to the f1 screen saying that it didnt post due to may have not that is due to instability that i should hit f1 to run setup did the mem ok being on screw things up?


Its normal after a bios update to press F1, after a bios update a screen coms up with press F1.

I dont know if your screw thinks up.

U can try clearing CMOS. how to, u can find in the manual from your motherboard.
0 Kudos

Laurent0717
Level 7
In response to Erwin05

‎04-18-2022 02:04 AM

Erwin05 wrote:
Its normal after a bios update to press F1, after a bios update a screen coms up with press F1.

I dont know if your screw thinks up.

U can try clearing CMOS. how to, u can find in the manual from your motherboard.


its not a question of f1 i know that but the cpu and ram lights on the mobo where going back and forth no matter what i did and ive tried clearing cmos before
0 Kudos

Erwin05
Level 10

‎04-18-2022 02:31 AM

Boot the pc up with only 1 memory stick, see what happens and do a clear cmos.

Maybe u can try Asus bios recovery mode.

https://www.asus.com/support/FAQ/1012219/
0 Kudos

Laurent0717
Level 7
In response to Erwin05

‎04-18-2022 02:44 PM

Erwin05 wrote:
Boot the pc up with only 1 memory stick, see what happens and do a clear cmos.

Maybe u can try Asus bios recovery mode.

https://www.asus.com/support/FAQ/1012219/


Asus explained to me that it is a memory compatability issue since it is no where on the QVL
0 Kudos

Erwin05
Level 10
In response to Laurent0717

‎04-20-2022 05:29 AM

Laurent0717 wrote:
Asus explained to me that it is a memory compatability issue since it is no where on the QVL


I saw that your memory wasnt in the QVL list, but it did work with a older bios.
0 Kudos