Results 1 to 3 of 3
  1. #1
    ROG Guru: White Belt Array
    Join Date
    Feb 2012
    Reputation
    10
    Posts
    98

    Fx516pm Second M.2 SSD Cooling

    Hello, my daugther have a Asus tuf dash f15 fx516pm and i want to add a second nvme drive to it.

    So i got a 1 tb Kingston Nv1 gen 3 as of the laptop only supports gen 3 and this was cheap and heard its a good drive.

    But i also want it to run cool so it dossent throttle.

    I noticed that the one that laptop came with had a thermal pad underneath 3-5mm maybe think and one on top 1 mm.

    but i can seem to find the original Asus thermal pads anywhere or anyone that has the one underneath and the one on top.

    I hope you guys can help me here?

    Thanks in advance

  2. #2
    TeamROG Moderator Array xeromist PC Specs
    xeromist PC Specs
    Laptop (Model)Dell Inspiron 15 7567
    MotherboardMSI x470 Gaming Plus
    ProcessorAMD 2600X
    Memory (part number)16GB Crucial Ballistix Elite 3600
    Graphics Card #1ASUS GTX 1080 Strix
    MonitorBenQ BL3200PT
    Storage #1Intel 600p NVMe
    CPU CoolerWraith
    Casecustom Antec 900
    Power SupplyCorsair HX1000
    Keyboard Logitech Orion Spark
    Mouse Logitech MX500
    Headset Plantronics 777 with Oregon Aero upgrade
    xeromist's Avatar
    Join Date
    Jul 2010
    Reputation
    397
    Posts
    8,400

    You don't need ASUS OEM thermal pads as long as you have the correct thickness. ASUS does not make its own thermal pads anyway.

    If you need several thicknesses you can buy a variety pack or stack several thinner pads. Stacking isn't ideal but as long as you make sure the pads are clean and you don't have an air bubble between them the performance should be adequate.
    Last edited by xeromist; 05-21-2022 at 02:57 AM.
    * Support disease research with Folding@Home *

    < < < Click the drop-down above my avatar for my PC specs!

  3. #3
    ROG Enthusiast Array
    Join Date
    Mar 2021
    Reputation
    12
    Posts
    52

    If it doesn't have a cooler in the laptop, like a plate that the Legion laptops have, it can be beneficial to get a low profile M.2 heatsink.

    I put a 970 Evo Plus in my A15 and it was getting pretty warm, I got a low profile aluminium heatsink, Gelid ultimate 1mm pad and a couple of long tiny tie wraps. The HS came with some rubber bands to hold it in place but every review said they failed in about 12months, which is why I used tie wraps. My SSD only had chips on the top side so I only needed cooling on the one side, it didn't come into contact with any other parts of the motherboard so it was safe. If it would touch the motherboard it would be worth using Kapton tape on the board where it may touch just to be sure there are no shorts. it has made a noticeable difference in ambient and working temps of the SSD so it is worth doing.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •