Results 1 to 5 of 5

Threaded View

  1. #1
    New ROGer Array
    Join Date
    Dec 2021
    Reputation
    10
    Posts
    2

    (WIDESPREAD) ROG Scar-15 Fan speeds capped recently even in manual mode

    This discussion is about ROG Strix Scar-15 G533Q_. In turbo mode Asus has capped the fan speeds to 5100rpm, but you could get past that in manual mode by setting a custom fan curve. Many Scar-15's got to around 7000-8000rpm at 100% fan speed. But recently Armoury Crate has seemed to cap the fan speeds of the CPU at 6100rpm and the GPU at 6300rpm both at 100%. This issue is not hardware based since MyAsus app is able to reach much higher rpm around 7-8k during a diagnostic test. This is drastically affecting performance for many users, for me personally it has increased the temps by 6-8C which is quite a lot since we are talking about a Gaming Laptop here! I have also contacted many other Scar 15 owners on Reddit whom also are experiencing this issue. I do not know if this was done intentionally or by mistake.

    I request Asus to look into this issue as soon as possible and roll out a fix since many people are unable to use their devices at their full potential thus leading to bad reputation for ROG devices.

    Information:-
    Item Version
    ---- -------
    Armoury Crate UWP App 5.1.5.0
    ROG Live Service 1.4.10.0
    Aura Service (Lighting Service) 3.05.40
    Armoury Crate service 5.1.9
    Aura Wallpaper Service Not installed
    ASUS Aac_NBDT HAL 2.5.12.0

    ----------------------------------------------------------------------------

    BIOS VERSION- 327

    OS-
    Edition Windows 11 Home Single Language
    Version 21H2
    Installed on ‎x/‎xx/‎xxxx
    OS build 22000.675
    Experience Windows Feature Experience Pack 1000.22000.675.0

    Personal specs- ROG Strix Scar-15 2021 G533QS Ryzen 9 5900HX RTX 3080 8GB, 16GB DDR4

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •