Results 1 to 4 of 4

Thread: ROG Ryujin II

  1. #1
    ROG Enthusiast Array Rolda PC Specs
    Rolda PC Specs
    MotherboardROG Crosshair VIII Dark Hero
    ProcessorRyzen 7 5800X
    Memory (part number)2x Kingston KF3200C16D4/16GX (32GB)
    Graphics Card #1TUF-RX6900XT-O16G-GAMING
    MonitorROG Strix XG49VQ
    Storage #1Samsung NVMe 970 EVO 500GB
    Storage #2Seagate ST3000DM007 3TB
    CPU CoolerROG Ryujin II 360
    CaseASUS TUF GAMING GT501
    Power Supplybe quiet! Power Zone 1000W
    Keyboard Roccat Ryos MK Pro
    Mouse Roccat Tyon
    OS Win 11 Pro x64 21H2

    Join Date
    Sep 2011
    Reputation
    10
    Posts
    41

    ROG Ryujin II

    Please combine the ROG Ryujin II driver with AI Suite 3.
    Why should I use Armory create just so I can setup Ryujin II?

    Or add Fan Xpert 4 to Armory create for all ROG motherboards. I have a Crosshair VIII Dark Hero. I don't have the option to manually set the fan curves in Armory create.

    Why ROG Ryujin II shows a flow rate 0?
    Last edited by Rolda; 06-24-2022 at 12:45 AM.

  2. #2
    ROG Enthusiast Array Rolda PC Specs
    Rolda PC Specs
    MotherboardROG Crosshair VIII Dark Hero
    ProcessorRyzen 7 5800X
    Memory (part number)2x Kingston KF3200C16D4/16GX (32GB)
    Graphics Card #1TUF-RX6900XT-O16G-GAMING
    MonitorROG Strix XG49VQ
    Storage #1Samsung NVMe 970 EVO 500GB
    Storage #2Seagate ST3000DM007 3TB
    CPU CoolerROG Ryujin II 360
    CaseASUS TUF GAMING GT501
    Power Supplybe quiet! Power Zone 1000W
    Keyboard Roccat Ryos MK Pro
    Mouse Roccat Tyon
    OS Win 11 Pro x64 21H2

    Join Date
    Sep 2011
    Reputation
    10
    Posts
    41

    Create a separate application to control LCD, pump and fans for Ryujin II !!!!!!!!
    "Flagship" in cooling and I need to install an armory create bloatware that constantly randomly freezes the PC. Really?! Until I had install create Armory on a PC, it was 100% stable. The pump control does not work either:
    0% - 50% --- 800 - 1650 RPM
    50% - 100% --- 1650 - 1650 RPM
    (Asetek 7th generation pumps 800 - 2800 rpm)
    Is my Ryujin II broken?
    Fan Xpert in Armoty create is not supported for Dark Hero, so I have to use AiSuite3 for fans. AiSuite3 works well for me but does not support Ryujin II because it does not connect to the AIO fan on the motherboard. That's crazy!
    Why not create a plugin for Ryujin II in AiSuite3?

  3. #3
    ROG Guru: Yellow Belt Array Murph_9000 PC Specs
    Murph_9000 PC Specs
    MotherboardROG Crosshair VIII Extreme
    ProcessorAMD Ryzen 5950X
    Memory (part number)Crucial Ballistix DDR4-3600 CL16 (BL16G36C16U4B.M16FE1)
    Graphics Card #1ROG Strix Radeon™ RX 6750 XT OC Edition 12GB GDDR6
    MonitorROG Strix XG43UQ, XG27AQM
    Storage #1Seagate FireCuda 530
    CPU CoolerROG Ryujin II 360
    CaseROG Strix Helios
    Power SupplyROG Thor 1200W Platinum
    Keyboard ROG Strix Scope RX, ROG Claymore II
    Mouse ROG Keris Wireless, ROG Chakram X
    Headset ROG Delta S
    Mouse Pad ROG Scabbard II
    OS Windows 11 Pro
    Network RouterROG Rapture GT-AX6000
    Accessory #1 LINKUP Ultra PCIe 4.0 x16 Riser Cable - Right Angle - 20cm

    Join Date
    May 2022
    Reputation
    60
    Posts
    196

    Yeah, me too. I've just built an all ROG system which I'm generally extremely happy with, and it's mostly living up to my high expectations. Integration of the different fan controllers and tools/utilities is one of the areas that just isn't fully living up to what I expected from it. The basics of the fan control are not bad, it's just I have a bunch of different ROG products which are not fully working as one for fan control (but do individually do an ok job of controlling the fans they are directly connected to).

    The USB ROG Fan Controller that ships with the Crosshair VIII Extreme, and the Ryujin II AIO are both controlled through Armoury Crate, but the Silent/Standard/Turbo/Full buttons on the AC Dashboard don't influence them. Inside AC, I have 3 different sets of those 4 fan modes that I have to change individually on different tabs; motherboard headers, expansion card headers, and AIO expansion card headers. There doesn't seem to be any real integration between them beyond each having its own little isolated corner of AC for control.

    The same goes for AiSuite & Fan Xpert, they only see the motherboard headers, none of the USB expansion card headers; and I get another set of the 4 high level mode buttons.

    An all-ROG system should really have at least one tool/utility somewhere that handles all of the daily fan management and monitoring in one place. I should have a set of those 4 fan mode/profile buttons which put all of the different products into Silent/Standard/Turbo with just a single click (even if per-product individual control is retained for maximum user choice). Kinda like Aura Sync, but for fans. Also, it would be kinda nice if the software recognised that a high end system is quite likely to not have a CPU fan or anything connected to that particular fan header; I'd love to get rid of the prominent mentions of CPU fan and "0 RPM" in danger-red next to it on the various panels that show fan information, replacing it with something useful such as the AIO or chassis fans (which may not all be on the chassis fan headers in the case of ROG motherboards that ship with a fan expansion card).

    The last thing on my list of fan irritations is the front panel and little fan speed card in the Helios case. That really needs an update for such a premium and beautiful case, to add some sort of motherboard fan speed control for the case fans. The basic high/low manual mode button on the front panel is ok for lower and mid range systems, I guess, but it would be fantastic if there was a way to integrate it cleanly on the high end. Maybe the button could have 3 modes, like the front panel lighting button (where the 3rd mode is motherboard control)? Or, have an optional USB-connected board which can replace the basic case fan controller and turn the button into swapping between Standard and Turbo in AC / Fan Xpert? This is more of a "nice to have" type thing than the issues with the various different software controls not integrating fully, but it would be something to really reward customers who do build the all-ROG high end system (little details like that can really help to keep the brand reputation and premium status).

  4. #4
    ROG Enthusiast Array Rolda PC Specs
    Rolda PC Specs
    MotherboardROG Crosshair VIII Dark Hero
    ProcessorRyzen 7 5800X
    Memory (part number)2x Kingston KF3200C16D4/16GX (32GB)
    Graphics Card #1TUF-RX6900XT-O16G-GAMING
    MonitorROG Strix XG49VQ
    Storage #1Samsung NVMe 970 EVO 500GB
    Storage #2Seagate ST3000DM007 3TB
    CPU CoolerROG Ryujin II 360
    CaseASUS TUF GAMING GT501
    Power Supplybe quiet! Power Zone 1000W
    Keyboard Roccat Ryos MK Pro
    Mouse Roccat Tyon
    OS Win 11 Pro x64 21H2

    Join Date
    Sep 2011
    Reputation
    10
    Posts
    41

    I agree with you. The problem is that ASUS is not listening to us. In AC, the Xpert Fan is only available for the Intel Z690 chipset. What about the others? That we have AI Suite III. Rog Ryujin II (flagship) fully works only with AC. Why is it such a problem to create support for Ryujin II and other fan hubs for AI Suite III ???

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •