ASUS ROG Maximus Z690 Extreme Issues - HELP!

[tcmathews]

OK, do you have any other system to try your GPU? If so go ahead. We have to zoom down all possibilities.

Not to this spec. I am also running a custom cooling loop and my card is water cooling only so moving to another unit and creating another cooling loop would be difficult and costly. I have ordered a replacement from Amazon to install to rule out the card being defective.

[tcmathews]

OK, do you have any other system to try your GPU? If so go ahead. We have to zoom down all possibilities.

Unfortunately no, the card is on a custom cooling loop and I dont have another tower to use and move it too. I have ordered a replacement GPU to swap in its place to test and see if its the GPU. I have noticed that this card has a little bit of a coil whine.

This is my card.....
https://www.gigabyte.com/Graphics-Ca...USX-WB-12GD#kf

[Silent Scone@ROG]

Running defaults on the boards, absolutely no over clocking on the system at all. I have even disabled all that I could find. Ram is Corsair Dominator 64gb, 2x32 dimms. I am on my 3rd motherboard, 3rd set of memory as well. Have reinstalled windows from fresh each time. This is from a Corsair report they had me send in. What is the best way to list my hardware, is there a utility I can run and save for you?

Remove the CPU cooler and CPU whilst checking for bent pins, then reattach cooler whilst making sure mounting pressure is even.

[tcmathews]

Remove the CPU cooler and CPU whilst checking for bent pins, then reattach cooler whilst making sure mounting pressure is even.

Not CPU, Socket, or pins. Been testing for over a week. I did replace the GPU, and for a week now, no errors thus far. When I emailed Gigabyte, they immediately replied RMA the card from the errors presented and didnt even want to troubleshoot. I appreciate all the advice and insight in this from everyone.

[Silent Scone@ROG]

Not CPU, Socket, or pins. Been testing for over a week. I did replace the GPU, and for a week now, no errors thus far. When I emailed Gigabyte, they immediately replied RMA the card from the errors presented and didnt even want to troubleshoot. I appreciate all the advice and insight in this from everyone.

Hello,

Sorry, we were all under the assumption you were still troubleshooting. Glad the GPU resolved it for you.

[tcmathews]

No problem, I really appreciate the help and insight in all to look at. I do still get the following error about every 4-7 days.

Fault bucket 1925935670592082795, type 5
Event Name: MoAppCrash
Response: Not available
Cab Id: 0

Problem signature:
P1: windows.immersivecontrolpanel_10.0.6.1000_neutral_ neutral_cw5n1h2txyewy
P2: praid:microsoft.windows.immersivecontrolpanel
P3: 10.0.22000.708
P4: 27a6d211
P5: ControlLib.dll
P6: 1.0.88.0
P7: 626a4ea7
P8: c0000005
P9: 0000000000008f8a
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER. 79ec4763-c3b4-4f3e-8206-063c2297cdee.tmp.mdmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER. 2c3d7e5f-870f-42b7-9af0-c140db9985f1.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER. 27518368-9c85-4f42-bd63-300ea5d1ccdb.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER. e6f9a51f-d61f-4818-8d27-b4e3d5b72f22.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER. 737b4b6c-86ca-414b-8757-8926e2956e50.tmp.txt

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArc hive\AppCrash_windows.immersiv_7413d8965e79c71df51 3da6417716b8f7233742_06ae74d7_ed77dab9-3962-4152-9de4-84dbc0239a25

Analysis symbol:
Rechecking for solution: 0
Report Id: ece47089-9cd4-460d-8509-615a683c7cf0
Report Status: 268435456
Hashed bucket: 8e29035ae962a1671aba4c49d1e5136b
Cab Guid: 0


Faulting application name: SystemSettings.exe, version: 10.0.22000.708, time stamp: 0x27a6d211
Faulting module name: ControlLib.dll, version: 1.0.88.0, time stamp: 0x626a4ea7
Exception code: 0xc0000005
Fault offset: 0x0000000000008f8a
Faulting process id: 0x52e4
Faulting application start time: 0x01d88fe3e0c426d0
Faulting application path: C:\Windows\ImmersiveControlPanel\SystemSettings.ex e
Faulting module path: C:\Windows\SYSTEM32\ControlLib.dll
Report Id: c48ba96e-ee52-4bf0-af38-44cc77283d36
Faulting package full name: windows.immersivecontrolpanel_10.0.6.1000_neutral_ neutral_cw5n1h2txyewy
Faulting package-relative application ID: microsoft.windows.immersivecontrolpanel

Hello,

Sorry, we were all under the assumption you were still troubleshooting. Glad the GPU resolved it for you.

[Silent Scone@ROG]

Is this a silent app crash? What are the symptoms?

[tcmathews]

When accessing settings from start menu. Clicking start, then settings. Im thinking an windows update may be the issue. I can still access through control panel with no crashes however. There is a feature update showing ready for download/install, going to try that and see. It does report to microsoft each time it happens

Is this a silent app crash? What are the symptoms?

[Silent Scone@ROG]

If no joy, try a system restore at a point before the issue occurred.