Results 1 to 3 of 3

Hybrid View

  1. #1
    New ROGer Array
    Join Date
    Jun 2022

    Asus ROG Ryujin 360 compatability


    Has anyone knowledge or experience with the Ryujin 360 (not II) working on a LGA1700 socket?
    The intention is to upgrade from a i9-9900k to i9-12900k and Asus support is less than helpful.


  2. #2
    New ROGer Array
    Join Date
    Jun 2022

    fwiw, the Ryujin 360 does mate up with the LGA1700 and does a fine job of cooling a i9-12900k cpu

  3. #3
    New ROGer Array Murph_9000 PC Specs
    Murph_9000 PC Specs
    MotherboardROG Crosshair VIII Extreme
    ProcessorAMD Ryzen 5950X
    Memory (part number)Crucial Ballistix DDR4-3600 CL16 (BL16G36C16U4B.M16FE1)
    Graphics Card #1ROG Strix Radeon™ RX 6750 XT OC Edition 12GB GDDR6
    MonitorROG Strix XG43UQ, XG27AQM
    Storage #1Seagate FireCuda 530
    CPU CoolerROG Ryujin II 360
    CaseROG Strix Helios
    Power SupplyROG Thor 1200W Platinum
    Keyboard ROG Strix Scope RX, ROG Claymore II
    Mouse ROG Keris Wireless, ROG Chakram X
    Headset ROG Delta S
    Mouse Pad ROG Scabbard II
    OS Windows 11 Pro
    Network RouterROG Rapture GT-AX6000
    Accessory #1 LINKUP Ultra PCIe 4.0 x16 Riser Cable - Right Angle - 20cm

    Join Date
    May 2022

    Looking through the box of spare bits for my new Ryujin II, you may need to source different standoffs for mounting your AIO. I know you're talking about the original Ryujin, not the II; but they are both standard Asetek AIOs in terms of the copper plate that sits on the CPU, the mounting stuff, and so on. They supplied 4 different types of motherboard standoffs with my one; original LGA 115X/1200/1366, Intel 1700, LGA 2011/2066, and AMD. The front and back plate that clamp it down onto the motherboard seem to be the same for all Intel, including the new 1700s.

    There shouldn't be a problem with the size of the thermal interface with the CPU, the standard Asetek round copper plate is pretty big. LGA1700 is 37.5x45mm. AM4 is 40x40mm. It covers my AM4 CPU nicely, with plenty of spare copper. An extra 2.5mm either side (assuming the new Intel socket and cooler mount are concentric) will still be within the outer limit of the cooler plate. The Ryujin II 360 certainly seems to keep up with the cooling fairly well on my 5950X (running it at up to around 200W), so I'd expect the original Ryujin 360 to be competent at taming the latest Intel thermal generators if it's in good condition.
    Last edited by Murph_9000; 07-02-2022 at 04:07 PM. Reason: Correction, 4 different types of standoffs

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts