Results 1 to 5 of 5
  1. #1
    New ROGer Array
    Join Date
    Jun 2022
    Reputation
    24
    Posts
    15

    Undervolt 12900ks on z690 rog maaximus extreme

    Hi,

    I'm having trouble finding the uefi settings to undervolt my cpu by approximately -0.100 volts permanently. I can do it with intel xtreme tuning utility and aisuite iii but can't tell where to do it in the bios. I would prefer not to have to do it every time i enter windows. I will continue searching posts, but thought I would try asking the community too.

    Any guidance would be appreciated.

    Thanks,

    B.

  2. #2
    Administrator Array Silent Scone@ROG's Avatar
    Join Date
    Mar 2016
    Reputation
    233
    Posts
    2,687

    Quote Originally Posted by jbmerrill1954 View Post
    Hi,

    I'm having trouble finding the uefi settings to undervolt my cpu by approximately -0.100 volts permanently. I can do it with intel xtreme tuning utility and aisuite iii but can't tell where to do it in the bios. I would prefer not to have to do it every time i enter windows. I will continue searching posts, but thought I would try asking the community too.

    Any guidance would be appreciated.

    Thanks,

    B.

    Hello,


    This can be achieve by adjusting the VF Curve points from within Extreme Tweaker or adjusting the AC_LL parameters. By how much this can be achieved for a given frequency depends on the CPU sample.

  3. #3
    New ROGer Array
    Join Date
    Jun 2022
    Reputation
    24
    Posts
    15

    Hi,

    I think I saw the voltage frequency curve settings, but that would be setting all cores individually i believe, correct (i think i saw offset available)? Isn't there just one single setting available for this? Also, what are the AC_LL parameters and where would I find them please?

    Thanks much for your reply.

    B.

  4. #4
    Administrator Array Silent Scone@ROG's Avatar
    Join Date
    Mar 2016
    Reputation
    233
    Posts
    2,687

    Quote Originally Posted by jbmerrill1954 View Post
    Hi,

    I think I saw the voltage frequency curve settings, but that would be setting all cores individually i believe, correct (i think i saw offset available)? Isn't there just one single setting available for this? Also, what are the AC_LL parameters and where would I find them please?

    Thanks much for your reply.

    B.
    The curve adjustment allows voltage offsets for all p cores at points along the V/F Curve depending on your target frequency, so you need to determine what you want that to be when undervolting.


    AC_LL can be found within the internal power management menu. Below are some recommended values based on the LLC set. More info here


    LLC#1
    DC_LL = 1.7
    AC_LL = 0.60

    LLC#2
    DC_LL = 1.46
    AC_LL = 0.50

    LLC#3
    DC_LL 1.1
    AC_LL 0.35

    LLC#4
    DC_LL 0.98
    AC_LL 0.30

  5. #5
    New ROGer Array
    Join Date
    Jun 2022
    Reputation
    24
    Posts
    15

    Okay, thanks much. I will look into this.

    B.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •