07-15-2022 02:22 AM - last edited on 03-06-2024 10:13 PM by ROGBot
07-15-2022 02:44 AM
07-15-2022 03:42 AM
Silent Scone@ROG wrote:
Hello,
Got Extreme Tweaker > CPU System Agent Voltage
Test between 1.05v - 1.25v
Go to Extreme Tweaker > Advanced memory settings
Test Memory Controller Voltage to between 1.25 - 1.35v
07-15-2022 04:24 AM
alexyenov wrote:
Thanks a lot for your help, friend!
Unfortunately, it did not work out for me, a huge number of errors still fall when setting the XML profile :((
I tried as you wrote, including the maximum values. By the way, it is strange that despite the manually entered values, others are displayed to the left of them, while they "float", that is, they change in real time during the display.
I don't know what to do next.
I am attaching a set of screenshots from the BIOS.
07-15-2022 03:57 AM
07-15-2022 04:54 AM
Hopper64 wrote:
I can’t use XMP settings at all with this generation so far.
Use manual settings and dial in the 6400 memory frequency and your primary timings. Then also use tweak mode 2.
Use manual for SAV with 1.249V, VDD/VDDQ 1.40V, MCC 1.35V.
See if that helps.*
07-15-2022 05:35 AM
07-15-2022 05:47 AM
07-15-2022 06:00 AM
07-15-2022 06:28 AM
Hopper64 wrote:
Post a picture of your dram timing control screen.