Hi Nate152,
Intel mod said
here 1.72 V is the max. voltage for the cpu. 1.72 V would nearly match 1.732 v.
The bios has shown the 1.732 V on the first page (i didnt look under advanced mode for readings, because i was very scared and rushed fast to the settings page for removing the wrong values for ac/dc). Normally the reading on the first page after entering bios are correct. Im really confused.
Which vcore value does the motherboard apply when it warns? The last setting before adjusting the ac/dc values?
Default settings are not really helping. The temps are higher as using v/f curve offset of - 100 mV.
Edit:
You are wrong btw. The board has set the shown voltage of 1.732 v. The idle temps within bios has been more than doubled. Clear indicator this crazy voltage has been applied.
Ok, better i kick this cpu. Not only for this reason, it's also a bad overclocker and undervolter. Last is most important for me.