good companions. sorry too use a traductor im spanish
I am going to precentar a mod I am making the case (NZXT phantom)
work is discussed in both rl and in case mod.
is trying to hide all the lower to only see the board and especially the rl.
will be the first time you pull sponsors and already I want to thank them.
Sponsors already confirmed:
hardware:
Motherboard: Asus Rampage Extreme 4
Processor: Intel I7 3820
Reports: To be confirmed
GPU: nvidia gtx 680
ssd: 3 60gb ocz vertex
HDD: 500gb velociraptor
Case: NZXT phantom white
CoolingSystem:
pumps: Koolance PMP-300 and EK-dcp 4.0
Deposit: alphacool coolplex p10lt
radiators: xspc 240rx and pro aquacomputer 240
fittings (19/13) bitspower, ek, phoyba, fatboy
CPU block: Swiftech apogee xlt
gpu block: ek-680 IN acetal
backplate gpu: ek 680 backplate
ram block: Koolance block
chipset block: tbc
tube: masterkleer 19/13 white
liquid COOLANT: mayhems biocide network
ventilation:
radiators: 1850rpm Nidec gt x4
Box: nox 1500rpm LED x4 network
wiring:
atx extension: 24pin white phoyba
sleeving: all electric cabelado made
Miscellaneous:
hitachi lcd customizable
phoyba x2 lcd temperature
lcd thermaltake 7 th
lian-li covered bays
mx-4 thermal paste
white LEDs
on Tuesday and began to get material and may be taking pictures.
I give special thanks to (frank) of canarinfo.com for its treatment and helping me out in my project and for giving much of the hardware.
It was time for a store in the Canary Islands with good prices and materials of all kinds
and also to (David) of prosilentpc.com to help me out when I needed it most.
To say the makeover of the website and the store. Now if that if
photos will go up and these days