Z590-E: ASUS RTX4090 stuck in PCIE 3.0 mode

[msamarskij]

Hi. two things. If you read back earlier in this thread you will see us Z590 owners were advised that this issue would be fixed in a future driver from Nvidia. Now Asus claim 1701 bios fixes the issue with no driver from Nvidia, which is not the case as 3 z590 users including myself so far say its still Pcie 3.0. and now again Asus says to wait for a Nvidia driver again. If im not wrong the Bios detects which Pcie version the Graphic card runs at and not the operating system so no driver will fix the issue as the system setup is before the operating system or any driver is loaded. two things can fix this, either updated bios on the motherboard or the Graphic card. Please can someone look into this. Thanks again

I completely agree with you. Quite right

[Frode68]

Hi Jiaszzz@Rog

1) Asus rog strix z590-f gaming wifi mainboard with the bios 1450 again.
2) I have Asus 4080 TUF gaming 16gb gfx card with nvidia 527.56 drivers
3) Using Gpu-z 2.52.0 and now it shows pcie x16 4.0 with bios 1701 it showed 3.0 and Cpu-Z 2.03.1 on Mainboard it show now pci ex. 4.0
4) Intel i7 11700k, g.skill trident z neo ddr 4 3600 mhz 32 gb (16gbx2), evga supernova 850w g2 power supply
5) windows 10 pro vers. 21h2, 19044.2364

[alster868]

@Jiaszzz@Rog

Same problem!

1) Asus ROG Apex XIII Z590 mainboard with the bios 1701.
2) Gigabyte 4090 Gaming OC 24gb with nvidia 527.56 drivers
3) Using GPU-Z 2.52.0 and now it is PCI-E x16 3.0 with bios 1701 and Cpu-Z 2.03.1 on Mainboard it shows PCI-E 4.0
4) Intel i7 11900k, G.Skill Trident Z Neo DDR 4 3600 mhz 32 gb (16Gbx2), Seasonic PX-1000 PSU
5) Windows 10 pro 21h2, 19044.2364

Kindly send me a fix beta bios via PM for my motherboard, thanks!

PS Which is the right USB port for the bios flashback on the Apex XIII? Thank you.

[nowakjan2000]

Same problem as above:

- ASUS ROG Maximus XIII Hero (BIOS 1071)
- Intel Core i9 11900KF
- ASUS TUF Gaming RTX 4090 OC Edition
- G.SKILL 32GB (4x8GB) 3600MHz CL16 Trident Z RGB
- Windows 11 Pro 22H2 (22621.963)

[lionhad]

Hello, Killersjp and Frode68. Thank you for your prompt reply.

After confirming with our relevant teams, the issue has been resolved in the BIOS version 1701, and we must wait for a future driver release from Nvidia to address it.
If you still have any concern about the current use, it is recommended that you use the previously provided special BIOS.
Please let me know if you need a special BIOS, and I will provide it through PM.

Thank you.

After installing the new driver 528.02, the error is fixed. My RTX 4090 Gaming OC runs in PCIE 4.0 mode. Thank you.

[alster868]

Yupeee! Issue solved with 528.02 new driver as of today. Thanks!

https://www.imagebam.com/view/MEHVYDM

Also confirmed with the PCI E feature test within 3D Mark suite - bandwith is 25 Gb/s as it should be

[nowakjan2000]

Confirmed.
Issue solved for me as well.
Thank you!

[Killersjp]

I have to say a big thank you to Asus and Nvidia for fixing this. To be honest I thought the fix was not going to happen. I am so happy to be wrong. Again a big thanks to Asus and Nvidia to listening to their users. Faith totally restored. Everyone have a great New Year of gaming. Lets Play.........

[Jctorres]

The new NVIDIA driver has solved the PCI 3.0 problem for me.
Now everything is working properly.
Thank you very much ASUS and NVIDIA for the support.
Regards
11700k and z590F.
RTX 4080

[Santo01]

Today I bought new RTX 4070 Ti and have the issue. Maximum speed is pcie 3.0 x16. Confirmed with 3DMark pcie feature test - 12.5 GB/s.

Asus TUF Gaming Z590 Plus Wifi (BIOS 1601)
Asus TUF Gaming RTX 4070 Ti OC

EDIT: Just found there is a new BIOS for my mobo (1801), flashed it, problem solved.