RaptorLake Resources

[sukrut4778]

https://www.dropbox.com/s/17tapc3yv4...-2203.zip?dl=0

Any one tested 2203 for the Z690 Extrene that is updated on the first page ?

Yes I tried but windows crashing continuously. Not even into windows login.
Also in bios it was showing chinese sometimes after booting into bios.
I tried to roll back to 2201 but I wasn't able to but was able to rollback to 2103.

[Fossi1972]

Working through 803 atm.

One thing I've noticed - and not sure which version this changed - is the custom fan curves using the T-Sensor input are not working.

I'm running a custom loop with a T-Sensor reading my coolant temperature. All my rad fans are off Chassis Fan 1-3 headers. The bios is showing a reading on T-Sensor, so the input is there, but all the rad fans still scale up under CPU load.

Anyone having a similar issues, and can this be looked into please?

ah this is not good I'm also using the T_Sensor (on a Z790-F) to control most of the chassis fans. I'm still on the 0703 bios where it is still working just fine.

[Smexhy]

I just flashed latest test bios from rog forum for my Z790 maximus hero, reset bios to default settings and tried asus AI OC agian out of curiosity. What do you guys think about these values?









the last picture shows basically idle pc, core voltage being on 1.447v, temp 33 celsius,6.1ghz


(not sure why it shows maixmum watts at 350w in that one picture lol, thought there is some kind of limit)

[raybantracing]

I just flashed latest test bios from rog forum for my Z790 maximus hero, reset bios to default settings and tried asus AI OC agian out of curiosity. What do you guys think about these values?









the last picture shows basically idle pc, core voltage being on 1.447v, temp 33 celsius,6.1ghz


(not sure why it shows maixmum watts at 350w in that one picture lol, thought there is some kind of limit)

core voltage is way too high as much as the wattage.
if you'll do something more demanding on the CPU it will be a throttle fest.

asus boards have no idea on how to correctly set a CPU even at stock frequency, leave alone when using the OC tools.

my extreme, with default settings, pushes 300W on my 13900K making it throttle at 100°C all the time, this is ridiculous.

[Smexhy]

core voltage is way too high as much as the wattage.
if you'll do something more demanding on the CPU it will be a throttle fest.

asus boards have no idea on how to correctly set a CPU even at stock frequency, leave alone when using the OC tools.

my extreme, with default settings, pushes 300W on my 13900K making it throttle at 100°C all the time, this is ridiculous.

I hope it only gets better with updates in the future, this is beta BIOS after all - not sure if it has any impact though since latest stable BIOS is same like this in regards of AI OC.

[YushBoss]

I got the same issue with my z690 formula even after following all the steps listed its still not working

My second m.2 just won't work

Motherboard: Z690 Maximus Formula
CPU: 13900K
M.2_1: NVME GEN 4 2TB
M.2_3: NVME GEN 4 2TB
GPU: 4090

[@tommy]

DDR4 on TUF Z690 is crappy like before with 2203 on Raptor Lake.

[Anteroth]

Havnt seen much but is there a concencus on Corsair platinum 7200 vs gskill 7200? both are using kynix chips, not sure if there was any other differentiators

[Neon Knights]

Hello,
I´m on Bios 804 - so far everything works fine as before, one restriction - I´m not a heavy overclocker, but i have a question :
Why did Asus returned to Bios 803 for download, is there something else wrong with 804 ? (besides Overclocking)
Thanks

[Silent Scone@ROG]

Havnt seen much but is there a concencus on Corsair platinum 7200 vs gskill 7200? both are using kynix chips, not sure if there was any other differentiators

Check QVL. Either shouldn’t be a problem; but tend to recommend GSKILL as usually have more guardband due to hand binning process.