Results 61 to 70 of 182
Thread: RaptorLake Resources
-
11-17-2022 03:06 AM #61Super Moderator Array
- Join Date
- Jul 2011
- Reputation
- 116
- Posts
- 861
there, check again
Originally Posted by Ataemonus
-
11-17-2022 10:50 AM #62Administrator Array
- Join Date
- Mar 2016
- Reputation
- 266
- Posts
- 2,889
Z790 APEX installed this morning
UEFI Hynix 2x16 SR 7600MT memory preset no trouble (801).
1.4 VDD/VDDQ/TX
MC VDD 1.35v
all other voltages are board controlled.
Quick 8000MT stability with some manual concessions to sub-timings. Effortless!
1.44 VDD/VDDQ/TX
-
11-17-2022 11:14 AM #63New ROGer Array
- Join Date
- Nov 2021
- Reputation
- 10
- Posts
- 5
@Shamino: can you please check and re-upload the Z690 TUF D4 WiFi file?
-
11-17-2022 11:30 AM #64ROG Guru: Orange Belt Array
- Join Date
- Dec 2014
- Reputation
- 245
- Posts
- 254
Thank you so much, Shamino. Awesome. Originally Posted by Shamino
-
11-17-2022 12:19 PM #65New ROGer Array
- Join Date
- Oct 2022
- Reputation
- 3
- Posts
- 8
I have a Maximus z790 Hero Board with the Gskil 7600CL36 Kits.
With 0801 Bios and XMP2 a had Systemfreeze.
I set the SA Voltage to 1.15, MC to 1.35. (VDD, VDDQ, and IVR TX 1.4)
The SA Voltage did the trick i think..
I was able to set 7800CL36 with SA Voltage to 1.15, MC to 1.35. VDD & VDDQ, 1.435 and IVR TX 1.4
XMP Tweaked works a lot faster than XMP2Last edited by magy77; 11-17-2022 at 06:09 PM.
-
11-17-2022 12:34 PM #66Administrator Array
- Join Date
- Mar 2016
- Reputation
- 266
- Posts
- 2,889
XMPII is the default DIMM profile, some of the sub timings will be relaxed Originally Posted by magy77
Originally Posted by magy77
There's still some of that with 13th gen, but not as much. Some CPUs will still get fussy, especially @ 7800 on the Hero where margins are tight.
-
11-17-2022 12:44 PM #67New ROGer Array
- Join Date
- Oct 2022
- Reputation
- 3
- Posts
- 8
On 7600 i had to lower the SA Voltage also to 1.15V (on Auto or 1.25V i get frezzes everytime)
@Silent Scone@ROG but the XMP Tweaked is new right? There wasn't a XMP Tweaked with Bios 0703Last edited by magy77; 11-17-2022 at 06:09 PM.
-
11-17-2022 01:02 PM #68New ROGer Array
- Join Date
- Oct 2022
- Reputation
- 3
- Posts
- 8
Can you Post some AIDA64 Benchmarktests? What was the READ Speed? Originally Posted by Silent Scone@ROG
Z790 APEX installed this morning
UEFI Hynix 2x16 SR 7600MT memory preset no trouble (801).
1.4 VDD/VDDQ/TX
MC VDD 1.35v
all other voltages are board controlled.
Quick 8000MT stability with some manual concessions to sub-timings. Effortless!
1.44 VDD/VDDQ/TX
-
11-17-2022 02:25 PM #69Administrator Array
- Join Date
- Mar 2016
- Reputation
- 266
- Posts
- 2,889
Yes this was added in one of the last updates. Originally Posted by magy77
regarding SA - signal rail things, sometimes less is better
-
11-17-2022 03:57 PM #70ROG Enthusiast Array
- Join Date
- Jul 2013
- Reputation
- 36
- Posts
- 57
All these Apex boards running 7600+ has me real tempted to return my Z790 Extreme and pick one of these up instead... Feeling like i got swindled
Reply With Quote