Results 1 to 2 of 2
  1. #1
    New ROGer Array
    Join Date
    Jan 2023

    Rampage V Extreme will not boot

    Hey guys looking for a SOS on this one. I got this Rampage V Extreme board/cpu/case from a guy at work. I slapped in a old hard drive I had laying around and some ram and I have been working on getting it running for the past three days after work. I have cleared the CMOS, Flashed the newest BIOS I found from

    So the issue is that when i go to boot up the windows installation media USB the white loading circles just keeps going. I let it run last night on the windows installation media and when i woke up to check up on it the Q-Code went from AA to 01. So i looked up some other people who were having this issue and found this guy who said to pull the CMOS and let the board rest for 20 minutes. Completed that and now im back to the White circles. Please help im pretty decent with computers so i should be able to follow along with instructions. Thank you in advance.

    Intel i7 5960x
    G-Skill Aegis DDR4 2133MHZ 16GB (4x4gb)
    Gigabyte GTX 970 G1 Gaming
    EVGA SuperNOVA 1600w P2
    Corsair Hydro Series H105 240 MM
    Miniatura de Adjuntos Miniatura de Adjuntos 326220286_3133107660168664_3357477422355429458_n.jpg  

    Last edited by ItachiUchi; 01-19-2023 at 12:04 AM.

  2. #2
    ROG Guru: White Belt Array JOSHSKORN PC Specs
    MotherboardRampage V Extreme
    Graphics Card #1GTX 980

    Join Date
    Sep 2015

    I saw the exact same post, presumably from you over at Tom's Hardware. Looks like you got the issue fixed by swapping out for a different SSD. Can you confirm?

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts