2600k on dry ice

**pcjunkie209** · 01-22-2011 06:11 AM

I will do some dice in the am tomorrow and post some pics. Retail 2600k is D2 revision and my understanding is D0 & D1 is no good at subzero FYI.

**pcjunkie209** · 01-23-2011 10:36 PM

Well no point in putting up pics. Sabertooth is no good on oc. Unless I did something wrong. I tryed everything. 4.8ghz on stock cooler or pot that's it. I am gonna get a different board. IMO don't buy if gonna oc past that or until newer bios release.

**xeromist** · 01-24-2011 01:54 AM

Bummer

I'm thinking it may take a generation before the manufacturers work out all of the kinks.

**69_Goat** · 01-24-2011 02:37 AM

What bios are you using?

There are a couple new bios here:

http://www.hwbot.org/forum/showthread.php?t=15952

**pcjunkie209** · 01-24-2011 04:04 AM

thanks Goat i'll try again. i checked Asus website and i have the one they have how come these aren't there?

**martin_metal_88** · 01-24-2011 09:35 AM

Can;t wait to see some result dude! Carry on and don't kill it

**pcjunkie209** · 01-25-2011 05:29 AM

Ok Goat I just updated bios. We will see what happens. Gonna start with air. I'll update this tonight.

Update- a little better 5.3ghz

elmy · 01-29-2011 08:44 PM

If you have say ram that is rated at 2133 run it at 1866 and ram rated at 1866 run it at 1600 and so on. Run it at one rating less than it is rated at. That is what I've experienced so far. Also get ram rated at 1.5 volts instead of 1.65 also helps out in a few cases as well.

reflex99 · 01-30-2011 04:22 AM

SB does very poorly at sub ambient temps.

the best you can do is a nice air cooler, even water is overkill.

Trust me, a bunch of us over at OCN tried, but dice/ln2 doesn't help anything

http://valid.canardpc.com/show_oc.php?id=1606285

^that was on air, with a broken bios

**pcjunkie209** · 01-30-2011 10:07 AM

Originally Posted by elmy

If you have say ram that is rated at 2133 run it at 1866 and ram rated at 1866 run it at 1600 and so on. Run it at one rating less than it is rated at. That is what I've experienced so far. Also get ram rated at 1.5 volts instead of 1.65 also helps out in a few cases as well.

i have a 2000 kit running at 1066 till i find stablebility then i wil dial in ram.

Originally Posted by reflex99

SB does very poorly at sub ambient temps.

the best you can do is a nice air cooler, even water is overkill.

Trust me, a bunch of us over at OCN tried, but dice/ln2 doesn't help anything

http://valid.canardpc.com/show_oc.php?id=1606285

^that was on air, with a broken bios

well FYI my D2 chip seems to run sub temps ok but i am tryin to find air threshold first. also i am using 1253 bios on sabertooth

xeromist PC Specs
Laptop (Model)	Dell Inspiron 15 7567
Motherboard	MSI x470 Gaming Plus
Processor	AMD 2600X
Memory (part number)	16GB Crucial Ballistix Elite 3600
Graphics Card #1	ASUS GTX 1080 Strix
Monitor	BenQ BL3200PT
Storage #1	Intel 600p NVMe
CPU Cooler	Wraith
Case	custom Antec 900
Power Supply	Corsair HX1000
Keyboard	Logitech Orion Spark
Mouse	Logitech MX500
Headset	Plantronics 777 with Oregon Aero upgrade

Thread: 2600k on dry ice

Thread Tools

Search Thread

Display

2600k on dry ice

Similar Threads

Unboxing of Sabertooth P67 & 2600K

2600k vs 980x?

Posting Permissions