cancel
Showing results for 
Search instead for 
Did you mean: 

2600k on dry ice

pcjunkie209
Level 9
I will do some dice in the am tomorrow and post some pics. Retail 2600k is D2 revision and my understanding is D0 & D1 is no good at subzero FYI.
"I would rather be gaming!" Grunts-clan.com
[SIGPIC][/SIGPIC]
http://Pcjunkiemods.com
http://c2cmods.com
22,929 Views
25 REPLIES 25

pcjunkie209
Level 9
Well no point in putting up pics. Sabertooth is no good on oc. Unless I did something wrong. I tryed everything. 4.8ghz on stock cooler or pot that's it. I am gonna get a different board. IMO don't buy if gonna oc past that or until newer bios release.
"I would rather be gaming!" Grunts-clan.com
[SIGPIC][/SIGPIC]
http://Pcjunkiemods.com
http://c2cmods.com

xeromist
Moderator
Bummer 😞 I'm thinking it may take a generation before the manufacturers work out all of the kinks.
A bus station is where a bus stops. A train station is where a train stops. On my desk, I have a work station…

69_Goat
Level 7
What bios are you using?

There are a couple new bios here:

http://www.hwbot.org/forum/showthread.php?t=15952
i7-980X | EVGA 762 Classified | 6GB Dom GT 2000C7 | GTX580 SLI

i7-2600K | Asus MIVE-Z68 | 4GB Dom GT 2000C8 | GTX580 Martix


69_Goat's HWBOT Profile




pcjunkie209
Level 9
thanks Goat i'll try again. i checked Asus website and i have the one they have how come these aren't there?
"I would rather be gaming!" Grunts-clan.com
[SIGPIC][/SIGPIC]
http://Pcjunkiemods.com
http://c2cmods.com

martin_metal_88
Level 8
Can;t wait to see some result dude! Carry on and don't kill it 😉
Martin_metal_88


Colenzo :Coolermaster ATCS 840 | Gigabyte's EP55-UD5 | Intel Core I7 860 @ 3.8Ghz | 4GB G.skill Trident 1600 | MSI GTX460 1GB HAWK Twin frozr | WD 640 black + WD 1TB green + WD 1TB Blue | Pionner DVR-216 | Silverstone Strider Plus 850W | Coolermaster Hyper 212 plus in push pull fan config |

Ask for more!

pcjunkie209
Level 9
Ok Goat I just updated bios. We will see what happens. Gonna start with air. I'll update this tonight.

Update- a little better 5.3ghz
"I would rather be gaming!" Grunts-clan.com
[SIGPIC][/SIGPIC]
http://Pcjunkiemods.com
http://c2cmods.com

Retired
Not applicable
If you have say ram that is rated at 2133 run it at 1866 and ram rated at 1866 run it at 1600 and so on. Run it at one rating less than it is rated at. That is what I've experienced so far. Also get ram rated at 1.5 volts instead of 1.65 also helps out in a few cases as well.

Retired
Not applicable
SB does very poorly at sub ambient temps.

the best you can do is a nice air cooler, even water is overkill.


Trust me, a bunch of us over at OCN tried, but dice/ln2 doesn't help anything

http://valid.canardpc.com/show_oc.php?id=1606285

^that was on air, with a broken bios

elmy wrote:
If you have say ram that is rated at 2133 run it at 1866 and ram rated at 1866 run it at 1600 and so on. Run it at one rating less than it is rated at. That is what I've experienced so far. Also get ram rated at 1.5 volts instead of 1.65 also helps out in a few cases as well.

i have a 2000 kit running at 1066 till i find stablebility then i wil dial in ram.

reflex99 wrote:
SB does very poorly at sub ambient temps.

the best you can do is a nice air cooler, even water is overkill.


Trust me, a bunch of us over at OCN tried, but dice/ln2 doesn't help anything

http://valid.canardpc.com/show_oc.php?id=1606285

^that was on air, with a broken bios

well FYI my D2 chip seems to run sub temps ok but i am tryin to find air threshold first. also i am using 1253 bios on sabertooth
"I would rather be gaming!" Grunts-clan.com
[SIGPIC][/SIGPIC]
http://Pcjunkiemods.com
http://c2cmods.com