cancel
Showing results for 
Search instead for 
Did you mean: 

help! bios update failed

ichinichi
Level 7
my mobo wont boot anymore after bios update failed. no beep but cpu led working. screen is blank so i don't what error might pop up in the screen, both video card and mobo HDMI are not working. help please^^
5,731 Views
6 REPLIES 6

ichinichi
Level 7
btw, my mobo is maximus 4 gen/z 3

Hi,what do you mean by bios update failed,what has actualy happened,have you tried taking power leed out,pressing the power button for several seconds to drain residual power,if your board has a "clear cmos" jumper,usualy situated near the battery,move the jumper to the other two pins,remove the battery for about 20 minutes,then put the jumper back to it's default pins,replace the battery,and reboot,hopefully this will help you.
ASUS CROSSHAIR V FORMULA-Z
AMD FX 8350 (1252)
INTEL CORE I7 2600K (3134A867)
ASUS MAXIMUS IV EXTREME-Z (0002)

OCZ VERTEX 3 120 SSD
GIGABYTE 890FXA UD7 REV 2.1 (F3)
GIGABYTE 890FXA UD7 REV 2.0 (F3)
VARIOUS AMD CPU's
8 GIG G-SKILL SNIPER LOW VOLTAGE 1600
4 GIG G-SKILL RIPJAWS X 2133 C9
8 GIG CORSAIR VENGEANCE 1600 C8 (HYNIX)
CORSAIR OBSIDIAN 800D
CORSAIR HX1000W PSU
2X RADEON HD6970'S XFIRE
4X SAMSUNG F3 1T HDD's 2X RAID 0
CUSTOM WATERCOOLING

I mean I flashback the bios from 3203 to default by it failed in the middle of the process.

ichinichi wrote:
I mean I flashback the bios from 3203 to default by it failed in the middle of the process.


Ok,so try the procedure i mentioned above,it's worth a shot.Also,it would help a lot if we know what motherboard you are using.???
ASUS CROSSHAIR V FORMULA-Z
AMD FX 8350 (1252)
INTEL CORE I7 2600K (3134A867)
ASUS MAXIMUS IV EXTREME-Z (0002)

OCZ VERTEX 3 120 SSD
GIGABYTE 890FXA UD7 REV 2.1 (F3)
GIGABYTE 890FXA UD7 REV 2.0 (F3)
VARIOUS AMD CPU's
8 GIG G-SKILL SNIPER LOW VOLTAGE 1600
4 GIG G-SKILL RIPJAWS X 2133 C9
8 GIG CORSAIR VENGEANCE 1600 C8 (HYNIX)
CORSAIR OBSIDIAN 800D
CORSAIR HX1000W PSU
2X RADEON HD6970'S XFIRE
4X SAMSUNG F3 1T HDD's 2X RAID 0
CUSTOM WATERCOOLING

Maximus 4 genZ 3 mobo. Thanks for the reply I'll try it

kittendoggie
Level 9
Send me your BIOS chip and I will reprogram it with the latest bios.