cancel
Showing results for 
Search instead for 
Did you mean: 

Problems O.C. 2xxx bios.

sisco
Level 7
Hi
1xxx with bios, my 3960x and under linx stable at 4.9,
with bios 2xxx, walls to 4.9, 4.8 and requires much higher voltages,
back to 1404, are again stable at 4.9.
Tips?

P.S.
same setting
3,394 Views
4 REPLIES 4

bluezero5
Level 10
stick with 1404 for now.
the 2X series bios still seems to be under a lot of development.

bluezero5 wrote:
stick with 1404 for now.
the 2X series bios still seems to be under a lot of development.


Look ahead and discover any fault for new bios update. Not just sitting back and waiting. Tell the team what you dont like about the update and not sitting back. Tell us what why you stick with 1404 and not the latest.
Change is the law of life. And those who look only to the past or present are certain to miss the future.

HiVizMan
Level 40
There is no need to update a BIOS just because there happens to be a newer version out there. You should only update and flash your BIOS if doing so will fix an issue.

Very pleased your voltages and temps are back where you had them sisco.
To help us help you - please provide as much information about your system and the problem as possible.

HiVizMan wrote:
There is no need to update a BIOS just because there happens to be a newer version out there. You should only update and flash your BIOS if doing so will fix an issue.

Very pleased your voltages and temps are back where you had them sisco.


Yes, voltages and temperatures are back as in the SCREEN
I hope for a stable version 2xxx as 1404, because it probably will pass on to W8.