Help with new rig

[mad4tech]

Hi
I having a few unexplained problems with my new rig hear is my spec:

Motherboard = Rampege4 Extreme
Boot Drive = Corsair force GT 240 GB
Processor = intel i7 3930K
Ram = Corsair vengeance 16 GB
Graphics card = Asus GTX 670
cooler = Corsair H80
Power supply = AX 650
Os = Window 7 ultimate
Case = coolermaster half X

these are the problems i have been having =

1. transferring my video from my internal hdd to a external usb 3.0 hdd it would make the system freeze the internal hdd was plugged in to the sata port that is controlled by the X79 so tried a other sata port it seams to work ok now.?

2. when shutting down or restarting windows it would take for ever or not shutdown at all not shoe if this is a micro soft problem or hard wear issue?

3. on Booting up the system it dos not seem to very quick?

4. Recently i have had a pop up box showing Network service help has stopped working problem event name : APPCRASH ???
if any body can help it would be appreciated

Freezing



Problem signature:
Problem Event Name: APPCRASH
Application Name: NetSvcHelp.exe
Application Version: 1.0.0.1
Application Timestamp: 4f3ba076
Fault Module Name: ntdll.dll
Fault Module Version: 6.1.7601.17725
Fault Module Timestamp: 4ec49b8f
Exception Code: c0000005
Exception Offset: 00033792
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789

Read our privacy statement online:
http://go.microsoft.com/fwlink/?link...8&clcid=0x0409

If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Please NOTE! that i have the latest BIOS 2105 and up dated windows the other drivers i have got from the Asus web sight and thanks again!

[InnervateD]

Is this a Fresh build of Windows 7 on the SSD with this setup? Or did you transfer the image of an existing drive over to the new SSD with all the new hardware?

[mad4tech]

:d:d:d:d:d:d

[mad4tech]

Is this a Fresh build of Windows 7 on the SSD with this setup? Or did you transfer the image of an existing drive over to the new SSD with all the new hardware?

Hi thanks for reply

yes it is about the fourth time i have don a fresh install from a genuine win 7 disc all so earlier was moving some files about and it started to run slow and the start bar disappeared it is very random lol ?????

[InnervateD]

My friend once had a computer issue where he was having random freezing issues with his drives reading and loading and stuff like writing to them.

I told him to bring it down to basics, and start with one drive and one stick of memory until he realizes what the issue is.

He didn't listen to me, and a few days later after he does what I told him to do, on his own of course. He told me one of his drives was acting up and it was causing windows to freeze up and stuff.

Now, I've actually seen this before with Windows 7, where if you have a failing drive, or a problematic drive, windows will stall and freeze up to make sure the drive is readable or useable in some kind of fashion.

If this is happening with your external drive only, I would check to see if you can move the drive to another enclosure or plug it in internally without the enclosure and see if the problem persists. If the drive is plugged in internally with no enclosure and if it works, it's the controller on the enclosure. If it's still happening, then it's the drive.

if the problem only exists when you plug it into your USB3.0 I would check your drivers, or check your USB3.0 header if your using the USB 3.0 front panel, I would plug it into the back and see it works from the back and not from the front USB panel.

[Zka17]

That Corsair SSD should go really fast... I'm wondering if you optimized the Windows for SSD...

You may want to check this: http://www.overclock.net/t/1156654/s...-for-ssds-hdds

[lenehan]

It may me the RAM issue. Do you have any spare ram for testing? Or you can just try using only one slot of ram to test it out.

[HiVizMan]

Please run CHKDSK for each of your hard drives, and that includes your external drives. I suspect that is where the issue is for the freeze during copy.

The slow boot, what USB stuff do you have connected to your system? Keyboard and mouse plus what else?

The appcrash, remove AISuite from your system and your problem will be gone.

[The Nemesis]

Is this system overclocked at all or stock? looking at your hardware you get right at 550w - 600w idle. I've had issues with vengance ram on my testbeds even when using xmp. Whats the speed of the ram 1600, 1866? try setting to auto or downclocking it.

[Zka17]

Yeah, maybe several cycles of Memtest86+ would not be too bad at this point...