- last edited on by
ROGBot
Hi guys
I hope im in the right place not sure what im doing wrong :-(. Its my first overclock attempt so any advise or help would be great. I have read all of the guides here and followed the videos but still not sure where the problem is.
Trying to achieve a moderate clock for every day use of 4.4 Ghz
It posts ok, I then run Prime95 on blend -temps- max 69-70 but PC crashes with Pime95 but crashes after 2 hours so not sure if its memory voltage, memory timings, cpu voltage or another setting (see images Nof Bios settings)
thanks for taking the time to read this and any advise will be appreciated
My Spec
Asus Rampage iv Extreme - Bios 2105 (latest version) - Full EK waterblock
Mem Corsair Dominator GT 2133 with DHX Pro Connector (4 x 4 sticks)
Proc 17 3930k @4.4ghz on XSPC RayStrom WaterBlock
GPU EVGA GTX 590 Hydro Copper Quad SLi
Power supply Corsair ATX 1200
Ran out of Image Space - so Cpu Configuration page=
Intel Adaptive Thermal Monitor Disabled
Hyper Threading Enabled
Active Processor Cores All
Limit CPUID MAximum Disabled
Everything else Enabled
I hope im in the right place not sure what im doing wrong :-(. Its my first overclock attempt so any advise or help would be great. I have read all of the guides here and followed the videos but still not sure where the problem is.
Trying to achieve a moderate clock for every day use of 4.4 Ghz
It posts ok, I then run Prime95 on blend -temps- max 69-70 but PC crashes with Pime95 but crashes after 2 hours so not sure if its memory voltage, memory timings, cpu voltage or another setting (see images Nof Bios settings)
thanks for taking the time to read this and any advise will be appreciated
My Spec
Asus Rampage iv Extreme - Bios 2105 (latest version) - Full EK waterblock
Mem Corsair Dominator GT 2133 with DHX Pro Connector (4 x 4 sticks)
Proc 17 3930k @4.4ghz on XSPC RayStrom WaterBlock
GPU EVGA GTX 590 Hydro Copper Quad SLi
Power supply Corsair ATX 1200
Ran out of Image Space - so Cpu Configuration page=
Intel Adaptive Thermal Monitor Disabled
Hyper Threading Enabled
Active Processor Cores All
Limit CPUID MAximum Disabled
Everything else Enabled
My first thought is about the power... are you OC'ing the graphic cards too? Do you have all power connectors filled with cables? Including the Ez_Plugs?
My second thought is on the memories... what is the exact model number of your kit? and version? Have you tried to run them at their XMP profile? I mean, set up the values manually based on the XMP profile... Also, running overnight Memtest86+ could save you a lot of time in terms of memory stability...
My second thought is on the memories... what is the exact model number of your kit? and version? Have you tried to run them at their XMP profile? I mean, set up the values manually based on the XMP profile... Also, running overnight Memtest86+ could save you a lot of time in terms of memory stability...
Please confirm that all power connectors are filled...
Not sure about the settings yet... why did you load the Elpida Hyper Profile? That's the reason I was asking about the version number of your memory... it's on the sticker on the modules...
Not sure about the settings yet... why did you load the Elpida Hyper Profile? That's the reason I was asking about the version number of your memory... it's on the sticker on the modules...
OK, then... I have the same kit, but the 8GB version...
The timings seems right, but why do you run them at 1.6V? They're rated at 1.5V... have you tried that?
And yes, you do have to do Memtest86+ to be sure that the memories are stable...
The timings seems right, but why do you run them at 1.6V? They're rated at 1.5V... have you tried that?
And yes, you do have to do Memtest86+ to be sure that the memories are stable...
Wait a minute! I'm talking about Memtest86+ not the Windows own memory testing...
You can read about Memtest86+ here: http://rog.asus.com/forum/showthread.php?19615-Memtest-User-Guide-For-ROG-Motherboards&country=&stat...
You can read about Memtest86+ here: http://rog.asus.com/forum/showthread.php?19615-Memtest-User-Guide-For-ROG-Motherboards&country=&stat...
I see... what is the BSOD code?
