Page 5 of 5 FirstFirst ... 3 4 5
Results 41 to 43 of 43
  1. #41
    ROG Guru: Orange Belt Array MonsterMawd's Avatar
    Join Date
    Apr 2011
    Reputation
    70
    Posts
    480

    the Ultimate Hacksaw! .....which I'll be using for cutting Copper tubing for hard line liquid loops

    $37.76 on Amazon, MSA 80975 4 In 1 Professional Hacksaw Frame: Amazon.com: Industrial & Scientific

    Key Features
    • Standard 90° for general use
    • 45° angle for flush cuts
    • Low profile position for tight spaces
    • Takes Sabre saw blades for a wide variety of uses
    • High tension for tightening the blade up to 30,000 psi
    • Cushion grip handle for better control and comfort
    • Magnetic blade storage inside frame
    Description
    Cast aluminium construction for durability. Cushion grips at each end for comfort and safety. The Nicholson Professional 4 in 1 Hacksaw Frame is a high quality, lightweight high tension hacksaw frame designed for the professional and serious user that offers four different cutting options for greater flexibility. When you're working away from the workshop this represents true value. It is hard to get excited about a hacksaw, but the Nicholson four functions is different and worth a look. With the far end folded back into the frame the blade can be mounted diagonally forming a high access hacksaw for cutting in restricted areas. Last but by no means least the design allows you to fit a sabre saw blade to the end of the frame, limiting cutting potential only to the variety of sabre saw blades in your possession. There is storage for two to three blades in the frame. 300mm blade.






  2. #42
    ROG Guru: Orange Belt Array MonsterMawd's Avatar
    Join Date
    Apr 2011
    Reputation
    70
    Posts
    480

    With Holidays approaching, I started thinking about what Tools I needed and recalled this thread. I always liked the look of the Romaxx CNC Routers after Craig started using one. You can make your own PC case, custom windows and fan or radiator grills.
    *
    HS-1, $2,490
    Store | Romaxx CNC Router Systems
    *
    Specifications:
    Travel 12.1" X-Axis - 19.6" Y-Axis - 3" Z-Axis
    *Rapids 1200 X-Axis - 1200 Y-Axis - 140 Z-Axis
    Cutting Speeds (straight lines) 1200 ipm X-Axis - 1200 ipm Y-Axis -140 ipm Z-Axis
    *Cutting Speeds (arcs/curves) 300-400 ipm X-Axis and Y-Axis - 140 ipmZ-Axis
    Dimensions:
    *
    Table 24x14x6
    Overall 24x18x22
    Largest Workpiece any Length by 14 wide by 4.4 tall
    Weight: 105lbs
    Voltage: 110 vac or 220 by request
    *

  3. #43
    Watercooled OC'er Array M11C PC Specs
    M11C PC Specs
    MotherboardRampage IV Black Edition
    Processor4820K
    Memory (part number)32GB G.Skill RipjawsZ 2400MHz CL10
    Graphics Card #1GTX 780 STRIX 6GB
    Storage #1Samsung SM951
    Storage #2Samsung 850 Pro 256GB
    CPU CoolerEK-FB RIVBE Monoblock
    CaseCorsair 900D
    Power SupplyCorsair AX1200i
    Keyboard Steelseries APEX
    Mouse Steelseries Sensei Raw
    Headset Steelseries Siberia V2 Heat Orange
    Mouse Pad Steelseries 9HD
    Accessory #1 Corsair Commander Mini
    Accessory #2 Nzxt IU01
    M11C's Avatar
    Join Date
    Mar 2015
    Reputation
    32
    Posts
    90

    Hi, nice thread

    was womdering if you know where i can find a 5.25 bay cover, like this one:
    http://www.amazon.com/5-25-Inch-Driv.../dp/B002ZRQ474

    from a UK/EU retailer preferebly, as shipping from US is pretty expensive.
    Last edited by M11C; 08-30-2015 at 11:49 PM.

    Watercooling FTW

    "essentially one of the most hardcore overclocking motherboards ever made."
    http://www.hardocp.com/article/2014/...board_review/7

Page 5 of 5 FirstFirst ... 3 4 5

Similar Threads

  1. MORE AIR?! Guide to adding 250mm cooling to your case
    By MonsterMawd in forum Case Modding & PC Builds
    Replies: 5
    Last Post: 05-04-2011, 04:26 PM
  2. Modding resources
    By DarthBeavis in forum Case Modding & PC Builds
    Replies: 5
    Last Post: 03-16-2011, 07:06 AM
  3. ROG Experience Tour - Round 2 (Discussion thread for case modding)
    By pcjunkie209 in forum Case Modding & PC Builds
    Replies: 10
    Last Post: 09-07-2010, 06:55 AM
  4. Read before you OVERCLOCK or Case modding your machine!
    By Brian@ASUS in forum Case Modding & PC Builds
    Replies: 0
    Last Post: 04-30-2010, 12:59 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •