cancel
Showing results for 
Search instead for 
Did you mean: 

[Work Log] Umbrella Corp Themed Case

notagain
Level 7
hey
just thought id make a work log of my pc.
Been working on this for some time but its almost at completed level
i carnt help myself adding more and more.

HARDWARE
CPU = Intel 3820 @ 4625mhz
GPU = Asus GTX 680 @ 1205Mhz
MB = Asus Rampage IV formula
RAM = Corsair dominator gt @ 2333mhz.
HDD1 = Corsair force GT 240gb ssd (os & Progs)
HDD2 = WD Green 2tb
PSU = Corsair Silent Pro Gold 800W
CASE = NZXT switch 810 White

WATERCOOLING
CPU BLOCK = XSPC RayStorm
GPU BLOCK = EK Full Cover VGA Block EK-FC680
RES = XSPC Premium Acrylic Reservoir
RAD1 = Watercool HTF4 420mm white (oversized)
RAD2 = Black ice SR1 140
PUMP = Koolance PMP-450S
PIPES = PrimoChill PrimoFlex Advanced Clear 1/2ID 3/4OD
FITTINGS = Bitspower shinning silver
COOLANT = Koolance fluorescent blue

MODS
LIGHTS = Stealth mounted in top, bottom, under psu, under mb and in case.
CONTROLLER = Lamptron FC6 Controlling SMD light Sections
CABLES = Individual sleeved 24pin / 8pin / dual 6 pin pcie
CABLES = Custom Fan Power runs for 9 top fans and 5 interior fans.
CABLES = Custom power run for pump & misc lighting

FANS
FRONT = 1x NZXT 140mm
BACK = 1x NZXT 140mm
INSIDE = 1x NZXT 140mm
RAD1 = 3x 140mm Bitfenix spectre pro / 6x 140mm Xigmatek push-pull
RAD2 = 2x 140mm Xigmatek

PERIPHERALS
MOUSE = Tron By Razer
KEYBOARD = Tron By Razer
SCREEN1 = Acer s273HL 27" LED
SCREEN2 = Benq G2410HD 24" LCD
HEADSET = Turtle Beach Z6a
SPEAKERS = Sherwood Home theater system 2x 6" long throw woofers + Sherwood powered 10" Sub

now for some build pics i carnt find the super early stage pics but was pretty usual stuff mb here, case here etc
early test fit with fans

early test fit with rad and fan controller

early test fit top/side view

test fit rear

test fit rear light on

test fit front lights off

test fit side soo clean

fitting the heattransformer rad was so large i had to remove the top optical bay 😄

rad looks like it belongs

top view

desided to fit fan controller inside so i could control light sections

smd light strips under the mesh on top part

completed both sides with smd strips

smd under psu

smd under mb

smd strip in feet / top / under psu / under mb

cpu block+ fittings

pump + pump top + res +fittings


then disaster struck i knocked the res over and trying to catch it i caught the wire and riped out the circuit out the back of the pump. ordered anew pump and continued

More piping

filled it up

tested in bathroom from 10 hrs (yes with no video card i was waiting on it)

closer

leak test + smds on

video card in cpu block led on

lower section

backpanel wiring stage 1

back panel wiring stage 2

back panel wiring stage 3

new sleeved asus themed cables
Perfection is achieved, not when there
is nothing more to add, but when
there is nothing left to take away.
11,735 Views
7 REPLIES 7

notagain
Level 7
finished





added a second rad sr140 on outside of case

connected 2nd rad

changed fans on rad to bitfenix spetre pro 140 from xigmatek xlf1455

top fans led/spin test


more pics once i recieve coolant (t-virus blue)
i will add a second 680 once the funds are available
also getting umbrella corp decals
Perfection is achieved, not when there
is nothing more to add, but when
there is nothing left to take away.

Myk_SilentShado
Level 15
Clean, beautiful...I love it!! 🙂

speed
Level 12
That is a big case. It has more room than my singlewide.

Being ingnorant and ingnored one post at a time.

notagain
Level 7
pipes done

closer

pccasegear express koolant

filled system

closer

rear rad

res filled & on

wiring stage 4


pulling the lamptron fan controller apart to paint face plate


painted faceplate


need to mount touch panel, lcd and so on
Perfection is achieved, not when there
is nothing more to add, but when
there is nothing left to take away.

notagain
Level 7
completed installed lcd and mounted

testing front res light

testing controller inside lights (no flash)

testing controller inside lights (flash)


next is to upgrade psu to Cooling Silence MKIII 1200W Modular Power Supply White PSU
and a second card and block maybe 😄 (if the wife will let me LOL)
Perfection is achieved, not when there
is nothing more to add, but when
there is nothing left to take away.

notagain
Level 7
due to leaky res i had to revert to air cool while i recovered funds and planned new run


rad on top with 9 fans in push / pull


parts in and it begins again


final placement


leak test done
Perfection is achieved, not when there
is nothing more to add, but when
there is nothing left to take away.

n113
Level 7
wowww dude~ lot of things going in there... awesome rig dude...
RIVE || 3930k @ 4.5 (-offset 0.010) || Vengeance 1866 4x4 || STRIX GTX980 || H100i GTX || CM pro-gold800w || 2x HyperX 3k 120GB || 750D af || awful cable management