hey
just thought id make a work log of my pc.
Been working on this for some time but its almost at completed level
i carnt help myself adding more and more.
HARDWARECPU = Intel 3820 @ 4625mhz
GPU = Asus GTX 680 @ 1205Mhz
MB = Asus Rampage IV formula
RAM = Corsair dominator gt @ 2333mhz.
HDD1 = Corsair force GT 240gb ssd (os & Progs)
HDD2 = WD Green 2tb
PSU = Corsair Silent Pro Gold 800W
CASE = NZXT switch 810 White
WATERCOOLINGCPU BLOCK = XSPC RayStorm
GPU BLOCK = EK Full Cover VGA Block EK-FC680
RES = XSPC Premium Acrylic Reservoir
RAD1 = Watercool HTF4 420mm white (oversized)
RAD2 = Black ice SR1 140
PUMP = Koolance PMP-450S
PIPES = PrimoChill PrimoFlex Advanced Clear 1/2ID 3/4OD
FITTINGS = Bitspower shinning silver
COOLANT = Koolance fluorescent blue
MODS LIGHTS = Stealth mounted in top, bottom, under psu, under mb and in case.
CONTROLLER = Lamptron FC6 Controlling SMD light Sections
CABLES = Individual sleeved 24pin / 8pin / dual 6 pin pcie
CABLES = Custom Fan Power runs for 9 top fans and 5 interior fans.
CABLES = Custom power run for pump & misc lighting
FANSFRONT = 1x NZXT 140mm
BACK = 1x NZXT 140mm
INSIDE = 1x NZXT 140mm
RAD1 = 3x 140mm Bitfenix spectre pro / 6x 140mm Xigmatek push-pull
RAD2 = 2x 140mm Xigmatek
PERIPHERALSMOUSE = Tron By Razer
KEYBOARD = Tron By Razer
SCREEN1 = Acer s273HL 27" LED
SCREEN2 = Benq G2410HD 24" LCD
HEADSET = Turtle Beach Z6a
SPEAKERS = Sherwood Home theater system 2x 6" long throw woofers + Sherwood powered 10" Sub
now for some build pics i carnt find the super early stage pics but was pretty usual stuff mb here, case here etc
early test fit with fans
early test fit with rad and fan controller
early test fit top/side view
test fit rear
test fit rear light on
test fit front lights off
test fit side soo clean
fitting the heattransformer rad was so large i had to remove the top optical bay
😄rad looks like it belongs
top view
desided to fit fan controller inside so i could control light sections
smd light strips under the mesh on top part
completed both sides with smd strips
smd under psu
smd under mb
smd strip in feet / top / under psu / under mb
cpu block+ fittings
pump + pump top + res +fittings
then disaster struck i knocked the res over and trying to catch it i caught the wire and riped out the circuit out the back of the pump. ordered anew pump and continued
More piping
filled it up
tested in bathroom from 10 hrs (yes with no video card i was waiting on it)
closer
leak test + smds on
video card in cpu block led on
lower section
backpanel wiring stage 1
back panel wiring stage 2
back panel wiring stage 3
new sleeved asus themed cables
Perfection is achieved, not when there
is nothing more to add, but when
there is nothing left to take away.