cancel
Showing results for 
Search instead for 
Did you mean: 

unoffical GPUtweak

oldbrave
Level 9
I can't say where I got this from, but it should give you core voltage up to 1.4v.
GPUtweak 2.2.14

http://www.mediafire.com/download.php?emczz0z8zey8pcg


WARNING: EXCESSIVE VOLTAGE WILL CAUSE EXCESSIVE HEAT
USE AT YOUR OWN RISK
Electronic Smoke Signals From my TechnoTeepee
ASUS Crosshair V Formula AM3+ 990FX, 1703 bios
AMD FX 8350 Vishera @ 5162Mhz [21x245] 1.546v 🙂
Water Cooled - Koolance EX2-1055, CPU 370 WB, Idle=22c Load=52c
32Gb G.Skill Sniper ddr3 1600 8G X 4 , 9-9-9-24 @ 1.55v
ASUS HD7970-DC2T-3GD5, Cat 13.5 beta 2, Dell U3011 @ 2560x1600
SanDisk Extreme 120Gb SSD SATA 6Gb, 250Gb SATA 6Gb, 1Tb SATA 6Gb x2
Win 7 Ultimate 64bit, Corsair Obsidian 800D, Corsair HX1000w PSU
17,534 Views
13 REPLIES 13

HiVizMan
Level 40
Cheers mate, it was released for some of the bencher fraternity as far as I can recall.
To help us help you - please provide as much information about your system and the problem as possible.

Arne_Saknussemm
Level 40
How exactly does this work...only in conjunction with a BIOS flash I presume?:confused:

HiVizMan
Level 40
Nope - all that it does is have a greater scale of voltage adjustment on certain cards that have a compatible voltage regulator chip. Where on the standard software the voltage range is capped by quite a bit. 1.13 I think it was.

This is really not for folks who are running stock or air coolers. Voltage = Heat = dead Graphic card. 😞
To help us help you - please provide as much information about your system and the problem as possible.

Arne_Saknussemm
Level 40
Yep, got that last bit. I'm thinking of WCing my cards so was interested.....anyway I downloaded it and it didn't give me any option out of the ordinary...my DCuIITops are still capped at 1175.....which cards let you go higher?...the stock cards? Is it like the 7970 OCd cards business?

oldbrave
Level 9
It tops my card out at 1.4v, but my card doesn't seem to want to go much above 1150Mhz and I only need
1.185V to get there.

Thanks for the reminder HiViz, I should have put the warning there from the start!
Electronic Smoke Signals From my TechnoTeepee
ASUS Crosshair V Formula AM3+ 990FX, 1703 bios
AMD FX 8350 Vishera @ 5162Mhz [21x245] 1.546v 🙂
Water Cooled - Koolance EX2-1055, CPU 370 WB, Idle=22c Load=52c
32Gb G.Skill Sniper ddr3 1600 8G X 4 , 9-9-9-24 @ 1.55v
ASUS HD7970-DC2T-3GD5, Cat 13.5 beta 2, Dell U3011 @ 2560x1600
SanDisk Extreme 120Gb SSD SATA 6Gb, 250Gb SATA 6Gb, 1Tb SATA 6Gb x2
Win 7 Ultimate 64bit, Corsair Obsidian 800D, Corsair HX1000w PSU

Rossi_
Level 9
Nice! Though still a bit buggy.
Putting 1.32v through my 7970 Matrix Platinum at the moment.

Retired
Not applicable
Great thread, thanks..

1,4v is always welcome..

Towel
Level 7
Invalid or Deleted File... Can you re-upload it please? 😛

oldbrave
Level 9
Thanks for the heads up on the glitch, link has be corrected!
Electronic Smoke Signals From my TechnoTeepee
ASUS Crosshair V Formula AM3+ 990FX, 1703 bios
AMD FX 8350 Vishera @ 5162Mhz [21x245] 1.546v 🙂
Water Cooled - Koolance EX2-1055, CPU 370 WB, Idle=22c Load=52c
32Gb G.Skill Sniper ddr3 1600 8G X 4 , 9-9-9-24 @ 1.55v
ASUS HD7970-DC2T-3GD5, Cat 13.5 beta 2, Dell U3011 @ 2560x1600
SanDisk Extreme 120Gb SSD SATA 6Gb, 250Gb SATA 6Gb, 1Tb SATA 6Gb x2
Win 7 Ultimate 64bit, Corsair Obsidian 800D, Corsair HX1000w PSU