Results 1 to 10 of 12
-
12-05-2012 11:40 PM #1
- Join Date
- Aug 2011
- Reputation
- 10
- Posts
- 7
G73SW-XT1 LCD is Faded around Edges
I have had the laptop for a little over a year. Around the edges of the screen it fades to white (not completely) when displaying the color black. It is extremely prominent during the windows 7 loading screen. If I use an all black desktop background you can see it fade to white a little bit on the top. The LCD screen has been doing this for a while, but I am pretty sure it is getting worse or has a least gotten a little worse since then.
What is going on here?Last edited by gman035t; 12-06-2012 at 12:07 AM.
-
12-06-2012 12:07 AM #2
- Join Date
- Jul 2012
- Reputation
- 68
- Posts
- 764
Any chance you could post a photo?
-
12-06-2012 12:16 AM #3
- Join Date
- Aug 2011
- Reputation
- 10
- Posts
- 7
-
12-06-2012 01:39 AM #4
- Join Date
- Jul 2012
- Reputation
- 68
- Posts
- 764
Interesting. Not really sure what that would be exactly, but it sounds like it must be some kind of display panel failure. You sure you can't get it to show up in a photo taken with a cell phone or actual camera? I appreciate the effort you've made thus far, but I'd love to be able to get a photo actually showing the issue if possible.
-
12-06-2012 01:52 AM #5
- Join Date
- Aug 2011
- Reputation
- 10
- Posts
- 7
You can see a lighter color around the edge of the screen particularly at the top. Trust me when I say that in person it is much more obvious, and even brighter. It also fades farther into the middle of the screen than what the picture shows. The picture doesn't really do it justice.
It's as if the backlight on the LCD is shining brighter around the edges of the screen or something.
-
12-06-2012 03:02 AM #6
- Join Date
- Aug 2011
- Reputation
- 10
- Posts
- 7
It really sounds like it is backlight bleeding after I read through this: http://www.pchardwarehelp.com/guides...t-bleeding.php
And these pictures are kinda like what I am talking about. Except my problem is only with dark color like black: http://hardforum.com/showthread.php?t=1032268
-
12-06-2012 06:12 AM #7
- Join Date
- Oct 2012
- Reputation
- 13
- Posts
- 2,441
hi, are you using a one year to appear, did you have do some test, like reinstall driver, resolution setting, or environment Interference like electricity wave..etc
also you can take back to ASUS service center to check if IW you also are able to SWAP.
-
12-06-2012 04:13 PM #8
- Join Date
- Aug 2011
- Reputation
- 10
- Posts
- 7
-
12-06-2012 07:14 PM #9
- Join Date
- Jul 2012
- Reputation
- 68
- Posts
- 764
Yeah, that's a much better example. And since you list your location as Ohio, that puts you firmly within my ability to influence things. In this case it means I was able to get approval to waive all repair fees for you. So, send me a PM or email, I'll collect some particulars, and set up an RMA for you.
-
12-08-2012 03:37 AM #10
- Join Date
- Aug 2011
- Reputation
- 10
- Posts
- 7
Thanks very much, but I use this laptop daily. I couldn't part with it right now. I see there is an Asus Service Center in Gibsonia, PA. I will be around that area for school early next year. Is it possible for me to take it there?