I'm entering my newest and current mod Project: Rage into the competition for some sweet hardware :D. Copying my current updates from TBCS.
So its time for a new PC. This will be a dream build + some very basic modding. So I'll be buying a nice big case, new hardware, water cooling it and making some sweet ascetic changes.
Hardware
Case: Cooler Master HAF-X 942
Mobo: ASUS SABERTOOTH P67 (REV 3.0)
CPU: Intel Core i7-2600K Sandy Bridge 3.4GHz (3.8GHz Turbo Boost)
PSU: CORSAIR HX Series CMPSU-750HX 750W
GPU: XFX GTX260 Black Edition (OLD)
Drive: LG Black 10X Blu-ray Burner
RAM: G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
HDD: 2 x 1TB WD 6Gb/s and 1 x 320GB WD SATA 6Gb/s
Water Cooling
Pump: DD-CPX-PRO
Radiator: Black Ice GTX Xtreme 280
Rad Fans: 2 x Yate Loon's
Reservoir: DD XSPC Single bay
CPU Water Block: Swiftech Apogee XT (R2) revision 2 or the XSPC Rasa CPU Black
Barbs: Bitspower Matte Black G1/4" Barb Fitting - 1/2" ID
Tubing: 7/16" PrimoFlex PRO LRT
Liquid: Distilled water + PT Nuke
Fill/Drain Port: Swiftech 1/2" Brass Remote Fill Port
Temp Sensor: 2 x Phobya Temperature Sensor Outer Thread G1/4 with Display
Temp Sensor Bracket: Phobya Front Bracket
Ball valve: For drain
Misc Parts
Replacement Rear Fan: Phobya 120mm
Replacement Top Fans: 2x Cooler Master 200mm Megaflow
Black Sleeving and Shrink Tubing
Red Sleeving and Shrink Tubing
Lighting Kit: NZXT
Fan Controller: Lamptron 20W
PCI Slot vents:
http://www.performance-pcs.com/catal...ducts_id=25976Fill Cap Adapter:
http://www.jab-tech.com/XSPC-M20x1.5...pr-4205.htmlTo attach the fill cable to directly to the res.
I'm still trying to find some good case paint. I ordered an air compressor so I will be able to use some spray paint.
I should be ordering the PC components in the next day or so and the WC parts in the very near future.
Cheers till then.