Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Graphics card error 43?

lewybear
Level 7

‎02-09-2013 10:33 AM - last edited on ‎03-06-2024 10:07 PM by Community Admin

Hey all
Quite strange I fitted my new cooler a NZXT x60 kraken 🙂 very pleased but I touched nothing else now my second card has disappeared or has error 43 in device manager.
Weirdly though when it's gone from windows as in wont even find in a device scan! In bios it shows up all the time. Any ideas?
Rampage v edition 10
I7-6950x @ 4.1ghz
Dominator platinum 32gb @ 3000mhz
NZXT X76 Kraken 360mm rad cooler
Corsair ax1600i psu full white cable set
Samsung EVO 970 1tb M.2 boot
Samsung EVO 850 1tbx4 SSD raid, storage
Titan xp jedi collectors edition
NZXT Phantom 820 full fan set
ROG frontbase
Samsung 55" 1000hz (140hz effective) 4k hdr tv as monitor
Windows 10 pro 64bit
Labels:
0 Kudos
10,866 Views
20 REPLIES 20

Chino
Level 15

‎02-09-2013 12:31 PM

Make sure your three pin fan connector is correctly inserted into the CPU FAN header on the motherboard.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

lewybear
Level 7

‎02-09-2013 01:21 PM

How will that stop windows detecting my second graphics card though?
Rampage v edition 10
I7-6950x @ 4.1ghz
Dominator platinum 32gb @ 3000mhz
NZXT X76 Kraken 360mm rad cooler
Corsair ax1600i psu full white cable set
Samsung EVO 970 1tb M.2 boot
Samsung EVO 850 1tbx4 SSD raid, storage
Titan xp jedi collectors edition
NZXT Phantom 820 full fan set
ROG frontbase
Samsung 55" 1000hz (140hz effective) 4k hdr tv as monitor
Windows 10 pro 64bit
0 Kudos

Chino
Level 15

‎02-09-2013 01:32 PM

Because if you haven't touched anything else, I can only think of two reasons why you would be having this problem: an incorrect physical installation or a driver problem/conflct. Since the physical installation is easier to diagnose, go verify your connections. Make sure the 3 pin cable and the usb cable are correctly connected to their respective headers.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

lewybear
Level 7

‎02-10-2013 03:34 AM

They are and not changed anything, I'm hoping now it's not the pcie slot 😞 I've already rma'd a chvf before this board and although I love them the problems from them are too numerous!!
Btw I've redone bios etc in the meantime aswell the card still is there in bios but not windows at all, or if it does after a format first couple of boots it's on error 43 before going.
Rampage v edition 10
I7-6950x @ 4.1ghz
Dominator platinum 32gb @ 3000mhz
NZXT X76 Kraken 360mm rad cooler
Corsair ax1600i psu full white cable set
Samsung EVO 970 1tb M.2 boot
Samsung EVO 850 1tbx4 SSD raid, storage
Titan xp jedi collectors edition
NZXT Phantom 820 full fan set
ROG frontbase
Samsung 55" 1000hz (140hz effective) 4k hdr tv as monitor
Windows 10 pro 64bit
0 Kudos

Chino
Level 15

‎02-10-2013 09:21 AM

Try switching the two GPUs around to see if the problem persists.
Overclocking The Core i7-7700K With DIP5 |Overclocking the Strix GTX 1080 | OC Panel & OC Panel II Guide | Overclocking i7-6700K to 4.6GHz | R5E 128GB DDR4 Setup | Liquid Cooling GTX 980 Ti Poseidon | R5E M.2 FAQ
0 Kudos

lewybear
Level 7

‎02-10-2013 10:04 AM

Done that used all my other cards and still same result really confused
Rampage v edition 10
I7-6950x @ 4.1ghz
Dominator platinum 32gb @ 3000mhz
NZXT X76 Kraken 360mm rad cooler
Corsair ax1600i psu full white cable set
Samsung EVO 970 1tb M.2 boot
Samsung EVO 850 1tbx4 SSD raid, storage
Titan xp jedi collectors edition
NZXT Phantom 820 full fan set
ROG frontbase
Samsung 55" 1000hz (140hz effective) 4k hdr tv as monitor
Windows 10 pro 64bit
0 Kudos

Zka17
Level 16

‎02-10-2013 10:40 AM

If you tried to reseat the graphics cards... well I recently found that only a Windows re-install will help... - leave in both of your cards and reinstall the OS... before you would install the drivers, Device Manager will show you the same Code, but it will be fixed after the drivers gets on... at least that's how I fixed mine... (can not give an explanation other than the OS is getting messed up over time)
0 Kudos

lewybear
Level 7

‎02-11-2013 01:28 AM

Nope still same problem I put a gt 430 in any slot and it works plus with one gtx560 any combo yep even all three in bios fine but that second gtx560 will not work in windows! In so lost is it the board or the card?
Rampage v edition 10
I7-6950x @ 4.1ghz
Dominator platinum 32gb @ 3000mhz
NZXT X76 Kraken 360mm rad cooler
Corsair ax1600i psu full white cable set
Samsung EVO 970 1tb M.2 boot
Samsung EVO 850 1tbx4 SSD raid, storage
Titan xp jedi collectors edition
NZXT Phantom 820 full fan set
ROG frontbase
Samsung 55" 1000hz (140hz effective) 4k hdr tv as monitor
Windows 10 pro 64bit
0 Kudos

Zka17
Level 16
In response to lewybear

‎02-11-2013 05:56 AM

lewybear wrote:
Nope still same problem I put a gt 430 in any slot and it works plus with one gtx560 any combo yep even all three in bios fine but that second gtx560 will not work in windows! In so lost is it the board or the card?


Have you re-installed the OS with all the cards you want to use inserted? Or you're trying to use a previous installation?

Sorry for persisting on this so much, but I recently had very similar problems on my RIVE and two HD7970s... the second one was giving that damn Code #43...

I have tried both cards individually in all the slots - and they were working perfectly... the problem was when I tried to use two of them...

The cards were OK as they were working on two other mobos (R3E and CHVZ), but not on RIVE... - btw, have you tried that VGA setup on other mobo?
0 Kudos