©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Saeid · ‎02-15-2013

Hi all,

This might be a bug. I have a ASUS GTX 660 DC2T, and a MSI GT 610.

When I open GPU tweak, it shows the selected card as GT 610 and it shows the core and voltage settings for the 660 card. And I can not change the card in the center window (I can change the card from the left window that is the monitoring area).

Is there a workaround or something in this case?

I should say MSI's Afterburner does not have this problem. It detects both card and shows right settings for any selected card.

Electronics Engineering Tutorials

MtDustB · ‎02-24-2013

I have the exact same problem but on top of it MSI Afterburn doesn't allow me to adjust voltage of my 6870 no matter what i do

Alteration · ‎11-01-2013

I had this issue too.
I have a 7970 and an msi GTX 560, GPU tweak seems to pick the 560 and sometimes crash on me.

bigcatroach · ‎01-10-2014

I just got a new R9 290x same issue only reading my old EVGA GTX280.
Using the EVGA Precision X for now because i can pick between the two cards.
Much rather use ASUS GPU Tweak if someone comes up with a solution.

GPU Tweaks shows wrong information when 2 different cards are present