Page 2 of 2 FirstFirst 1 2
Results 11 to 17 of 17

Thread: Will it fit?

  1. #11
    ROG Member Array
    Join Date
    Feb 2013
    Reputation
    10
    Posts
    9

    Ill keep an eye on it, ill try to do it by putting it on the 3rd setting, a bit balanced.
    Also there wasnt any sticker on the pump top, that including the broken pin (I bought it new from a shop where i usually go, never had problems before till now) i dunno where the 3rd setting or whatever is. Guess I'll have to feel for 'clicks' or whatever.

  2. #12
    ROG Guru: Diamond Belt Array Zka17's Avatar
    Join Date
    Mar 2012
    Reputation
    199
    Posts
    8,358

    There is no pin on that speed regulator... is a slit instead... - you van rotate it with a screwdriver... as you place the tip of the screwdriver, at one end will be an arrow, that has to point at the numbers...

  3. #13
    ROG Member Array
    Join Date
    Feb 2013
    Reputation
    10
    Posts
    9

    I know, but like i said, that thing is broken off, so i need to open up the back of the pump, and twist it there. About the numbers, like i said before, there's no sticker for that on the pump, so i just need to experiment a bit.

  4. #14
    ROG Guru: Diamond Belt Array Zka17's Avatar
    Join Date
    Mar 2012
    Reputation
    199
    Posts
    8,358

    OK, give me few minutes and I will make some pics from one of my pumps... that way you will know how the numbers are orieneted...

  5. #15
    ROG Guru: Diamond Belt Array Zka17's Avatar
    Join Date
    Mar 2012
    Reputation
    199
    Posts
    8,358

    OK, here it is:

    Click image for larger version. 

Name:	pumpback.jpg 
Views:	0 
Size:	723.8 KB 
ID:	17421

    As you see, the middle 3rd setting is almost along the diagonal going through the knob and the middle of the pump's back... (this is set at the third speed)

  6. #16
    ROG Member Array
    Join Date
    Feb 2013
    Reputation
    10
    Posts
    9

    Ty a lot, ill use this when the blocks get in

  7. #17
    ROG Guru: Diamond Belt Array Zka17's Avatar
    Join Date
    Mar 2012
    Reputation
    199
    Posts
    8,358

    No probs, mate - good luck!

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •