Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast
Results 21 to 30 of 53
  1. #21
    ROG Guru: Yellow Belt Array skywalker311's Avatar
    Join Date
    Dec 2012
    Reputation
    11
    Posts
    158

    I love it guys. Keep up the great work.
    Phanteks enthoo primo, i7-4770k, ASUS MVIF, 16GB G.Skill Trident X Ram, ASUS 780 Ti DC2O, Samsung 120GB and crucial M500 480gb SSD, 1TB Western Digital Hard Drive, NZXT 850W power supply
    EK Supremacy, EK ASUS MVIF Water Block, EK Monarch Series X4 Ram, EK ASUS 780 Ti DCII, EK 420 Cool Stream Rad, XPSC 240mm RAD,Monsoon Series Two Dual Bay Reservoir, Swiftech MCP655-PWM-Water Pump, Monsoon Compression Fittings & Tubbing, Mayhems Pastel Red with Mayhems ultra pure h20.

  2. #22
    ROG Enthusiast Array n113's Avatar
    Join Date
    Jan 2013
    Reputation
    10
    Posts
    65

    very neat and clean guys... like others, i love it...
    RIVE || 3930k @ 4.5 (-offset 0.010) || Vengeance 1866 4x4 || STRIX GTX980 || H100i GTX || CM pro-gold800w || 2x HyperX 3k 120GB || 750D af || awful cable management

  3. #23
    ROG Guru: White Belt Array
    Join Date
    Feb 2013
    Reputation
    14
    Posts
    87

    27th March Update more tubing

    Quote Originally Posted by skywalker311 View Post
    I love it guys. Keep up the great work.
    Quote Originally Posted by n113 View Post
    very neat and clean guys... like others, i love it...
    Thank you both very much!

    UPDATE TIME!

    Sponsors:








    So to continue with the rebuild to get all the cable management in place. We did it almost in a backwards fashion. No cable holes initially then after a full rig build mark up the exact measurements and cut again. Long winded indeed but gets the finish we wanted.

    60mm Alphacool back in place:



    Gentle fans installed via the second layer/accent panel:



    Would like to welcome Pexon on board. We met James from Pexon at iSeries and got to spend a good bit of time together. We have actually traded work for work here and this is a shot of the PSU as you may have seen already if you follow his work:



    Next some floppy tubing that needs to be used in places that wont be seen in the final. It was impossible to not use any in a build so small but it wont be seen. Also the 8pin EPS for the motherboard:






    With the Enermax fans installed:



    And as promised the EK block changed to clear/frosted:



    We had been lucky enough to part exchange an old card for a second GPU and got the matching block for it. SLI connector goodness here from EK:



    A little idea of what is going on up there to make this thing all happen. Lots of holes, lots of mad connectors. Excuse the mixture of fittings. These won't be visible so it didn't have to all be bitspower



    So now because of the second GPU that we didn't take into account efficiently we had to change the tube routing. It doesn't look as amazing as the all in line tubing but after seeing it filled with tester fluid it still looks amazing and we are really happy.
    Here are some photos of the fittings and changes:







    A few random shots of the PSU cables and the top chamber, starting to take shape:




    To end the update a few shots of the routing system. Though not all direct to the top they work really nice and straight tubing is killer:




    Again thank you SO much for reading. It means everything to us. Please throw questions, advice and/or ideas at us!

    See you on the next one!! :rock:
    Last edited by parvumsystems; 03-27-2013 at 06:53 PM.

  4. #24
    imMortal Kombatant Array Myk SilentShadow PC Specs
    Myk SilentShadow PC Specs
    MotherboardASUS Rampage IV Formula
    ProcessorIntel i7 3930K
    Memory (part number)8GB Corsair XMS3 1600
    Graphics Card #1ASUS Radeon 7970 3GD5
    Sound CardROG Xonar Phoebus
    MonitorSamsung SyncMaster SA300
    Storage #1Corsair Neutron 128GB
    Storage #2Seagate 2TB
    CPU CoolerCorsair A50 Pro Air Cooler
    CaseBitFenix Merc Alpha
    Power SupplyThermaltake Litepower 700W
    Keyboard Alienware TactX Keyboard
    Mouse Tesoro Gandiva H1L
    OS Win7 Ultimate x64
    Myk SilentShadow's Avatar
    Join Date
    Jan 2012
    Reputation
    266
    Posts
    5,241

    Looks awesome guys, really saw your post earlier on FaceBook, the black and red one with the etched in (dragon?) design...THAT was just beautiful.

  5. #25
    ROG Guru: White Belt Array
    Join Date
    Feb 2013
    Reputation
    14
    Posts
    87

    Quote Originally Posted by Myk SilentShadow View Post
    Looks awesome guys, really saw your post earlier on FaceBook, the black and red one with the etched in (dragon?) design...THAT was just beautiful.
    First up thanks for following us on Facebook! That's awesome. Glad you liked the case; I think it may be stuck in customs at the moment as they think it is a brief case... :/ its gone to Iceland!

  6. #26
    imMortal Kombatant Array Myk SilentShadow PC Specs
    Myk SilentShadow PC Specs
    MotherboardASUS Rampage IV Formula
    ProcessorIntel i7 3930K
    Memory (part number)8GB Corsair XMS3 1600
    Graphics Card #1ASUS Radeon 7970 3GD5
    Sound CardROG Xonar Phoebus
    MonitorSamsung SyncMaster SA300
    Storage #1Corsair Neutron 128GB
    Storage #2Seagate 2TB
    CPU CoolerCorsair A50 Pro Air Cooler
    CaseBitFenix Merc Alpha
    Power SupplyThermaltake Litepower 700W
    Keyboard Alienware TactX Keyboard
    Mouse Tesoro Gandiva H1L
    OS Win7 Ultimate x64
    Myk SilentShadow's Avatar
    Join Date
    Jan 2012
    Reputation
    266
    Posts
    5,241

    Quote Originally Posted by parvumsystems View Post
    First up thanks for following us on Facebook! That's awesome. Glad you liked the case; I think it may be stuck in customs at the moment as they think it is a brief case... :/ its gone to Iceland!
    Oh good grief!!! where was it headed? and hey no worries, I saw your prices on the site and I am pretty floored at how low you guys are offering your cases for...hell I might have to buy one for my Media Centre PC Build btw...Would it be possible to have one supporting 6 3.5 instead? or 5 and 1 2.5?
    Last edited by Myk SilentShadow; 03-28-2013 at 12:09 PM.

  7. #27
    ROG Guru: Orange Belt Array Giannis996 PC Specs
    Giannis996 PC Specs
    Laptop (Model)Macbook Pro Mid 2014
    MotherboardAsus Rapage IV Extreme Black
    ProcessorIntel Core i7 4820K
    Memory (part number)32Gb Corsair Dominator Platinum 2133Mhz
    Graphics Card #1Asus GTX Titan
    Graphics Card #2Asus GTX Titan
    MonitorAsus VK278
    CPU CoolerCorsair H100i
    CaseCorsair Obsidian 750D
    Power SupplyCoolermaster V850
    Keyboard Razer Blackwidow X Chroma
    Mouse Razer Deathadder
    Headset Razer Kraken 7.1
    OS Windows 10
    Giannis996's Avatar
    Join Date
    Mar 2012
    Reputation
    12
    Posts
    384

    wow man you are really awesome!!!! im waiting to see more pics!!!!!
    Project Name: System Specs:
    Motherboard: Asus Rampage IV Black Edition
    Prossesor: Intel Core i7 4820k
    Graphic Card: Asus GTX Titan x2
    *Power Supply: Cooler Master V850
    Ram: 32Gb Corsair Dominator Platinum 2133Mhz
    Case: Corsair Obsidian 750D
    SSD: 2x Samsung Evo 250Gb Raid 0
    HDD: 2x Seagate Baraccuda 2TB

  8. #28
    ROG Guru: Orange Belt Array Giannis996 PC Specs
    Giannis996 PC Specs
    Laptop (Model)Macbook Pro Mid 2014
    MotherboardAsus Rapage IV Extreme Black
    ProcessorIntel Core i7 4820K
    Memory (part number)32Gb Corsair Dominator Platinum 2133Mhz
    Graphics Card #1Asus GTX Titan
    Graphics Card #2Asus GTX Titan
    MonitorAsus VK278
    CPU CoolerCorsair H100i
    CaseCorsair Obsidian 750D
    Power SupplyCoolermaster V850
    Keyboard Razer Blackwidow X Chroma
    Mouse Razer Deathadder
    Headset Razer Kraken 7.1
    OS Windows 10
    Giannis996's Avatar
    Join Date
    Mar 2012
    Reputation
    12
    Posts
    384

    uuhh any idea where i can find this CNC machine?? i need it for the same reason and also where i can find the motherboard's offsets?
    Project Name: System Specs:
    Motherboard: Asus Rampage IV Black Edition
    Prossesor: Intel Core i7 4820k
    Graphic Card: Asus GTX Titan x2
    *Power Supply: Cooler Master V850
    Ram: 32Gb Corsair Dominator Platinum 2133Mhz
    Case: Corsair Obsidian 750D
    SSD: 2x Samsung Evo 250Gb Raid 0
    HDD: 2x Seagate Baraccuda 2TB

  9. #29
    ROG Guru: White Belt Array
    Join Date
    Feb 2013
    Reputation
    14
    Posts
    87

    30th March cable management

    Quote Originally Posted by Giannis996 View Post
    uuhh any idea where i can find this CNC machine?? i need it for the same reason and also where i can find the motherboard's offsets?
    Hi there. Our machine was built for us in the UK by a friend so I would't be able to advice here. If you mean motherboard standoffs you can grab them on eBay or most modding sites

    !!UPDATE!!

    Time to manage some cables.

    Sponsors:









    So first we work on the top chamber. A portion of this will be kept visible from above so these will be managed with some degree of care. The back of the case will be contained so we don't have to be as careful.

    We begin by using MDPC clips and clamping each 6 cable bundle to the acrylic:



    To fit these cables we use brass inserts and M3 bolts:




    To insert the brass peices into the acrylic we used the good old solder iron trick that we first spotted on a project log some time back:






    Finishing the rest of the GPU power leads:




    Moving to the back of the case; more of the same but as I said not important here to keep it tidy, these wont be seen. The only reason we are doing it is to take any cable bulge or pressure off of the side panel:




    With the 24pin we just cable tie it to the other cables. Again we are not going to make this look perfect as it will be housed with acrylic:




    Sadly that is all for today folks. Just keeping you in the loop!

  10. #30
    ROG Guru: Orange Belt Array Giannis996 PC Specs
    Giannis996 PC Specs
    Laptop (Model)Macbook Pro Mid 2014
    MotherboardAsus Rapage IV Extreme Black
    ProcessorIntel Core i7 4820K
    Memory (part number)32Gb Corsair Dominator Platinum 2133Mhz
    Graphics Card #1Asus GTX Titan
    Graphics Card #2Asus GTX Titan
    MonitorAsus VK278
    CPU CoolerCorsair H100i
    CaseCorsair Obsidian 750D
    Power SupplyCoolermaster V850
    Keyboard Razer Blackwidow X Chroma
    Mouse Razer Deathadder
    Headset Razer Kraken 7.1
    OS Windows 10
    Giannis996's Avatar
    Join Date
    Mar 2012
    Reputation
    12
    Posts
    384

    uh..sorry to bother you again but can you tell me whats the thickness of the aluminium you use? i have a router (my father) about 6m x 2m its a multicam 3000 but i have never used it for alyminium or steel...only pexiglass...and as im also modding my case i need to know if i can use it for cutting my pieces instead of sending them for laser cut.
    Project Name: System Specs:
    Motherboard: Asus Rampage IV Black Edition
    Prossesor: Intel Core i7 4820k
    Graphic Card: Asus GTX Titan x2
    *Power Supply: Cooler Master V850
    Ram: 32Gb Corsair Dominator Platinum 2133Mhz
    Case: Corsair Obsidian 750D
    SSD: 2x Samsung Evo 250Gb Raid 0
    HDD: 2x Seagate Baraccuda 2TB

Page 3 of 6 FirstFirst 1 2 3 4 5 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •