cancel
Showing results for 
Search instead for 
Did you mean: 

NEW Intel MEI 8.1.30.1350

Red_Jhon
Level 10
New Intel MEI on Station Drivers:

http://www.station-drivers.com/page/intel%20chipset.htm



Uploaded with ImageShack.us

Within the package, there is also the GBE firmware, how can I know the version and flash it?

I flashed the firmware of the network adapter with FPT



Uploaded with ImageShack.us
125,082 Views
129 REPLIES 129

Necrosan
Level 12
Thanks for posting.
I already was on the 1.5 version of GBE but the new MEI firmware updated just fine & is working as expected.
MB: ASUS Rampage IV Black Edition
CPU: Intel Xeon E5-2697 v2 (Cooled by Corsair H100i w/ Noctua NF-F12 fans)
RAM: 64GB G.SKILL RipjawsZ 1600 (10-10-10-30)
GPU: EVGA GeForce GTX Titan X Hybrid
TV Tuners: 2 * Hauppauge HVR-1800
Case: CoolerMaster Cosmos 2

R4E3960X
Level 10
Thank you Necrosan , Nice update!!!

ASUS RAMPAGE IV BIOS 3404 with Intel Management Engine Firmware 8.1.30.1350 @work


ME Info Step


It's flying very well with Intel Management Engine Driver 9.0.0.1310 as you see. 😮
Intel Core i7 3960X 😮 C2 SR0KF 😮 @3.3GHz ASUS RAMPAGE IV EXTREME BIOS 3602 03/15/2013 16 GB GSKILL ZL 9-9-9-24-1T @1600MHz Quad Channel HIS HD7979 1050MHz GPU 1500MHz DDR5 120GB OCZ VERTEX 3 SATA 6Gbps ASUS 24X DVD Corsair AX750 WINDOWS 8 PRO X64 6.2.9200.16384 RELEASE😮

R4E3960X, please, could you tell me where can i get Intel ME updating tool for RIVE? a greeting

majote wrote:
R4E3960X, please, could you tell me where can i get Intel ME updating tool for RIVE? a greeting


OK! You can download Intel ME 8.1.30.1350 firmware from Nacrosan link above. Then extract the file by WinZip or WinRAR that you've.

Step 1 :: Move the folder Local-Win64(If you run Windows 64 bit environment , if you run on Windows 32-bit move the folder Local-Win)
to C:\> and open Admin Command Prompt as picture below 😮


Step 2 :: At Admin Command Prompt C:\> Change Directory with simple command you're welknown as picture below:o


Step 3 :: type only "flash" then enter. System will flash your ME with new 8.1.30.1350 Do not shut down during this process.
After finished . Type "exit" to shutdown Admin Command Prompt window then shutdown your system . Complete. 😮

When you've power on your system again. Enter the BIOS page you'll noticable that your ME firmware already updated! 😮
Intel Core i7 3960X 😮 C2 SR0KF 😮 @3.3GHz ASUS RAMPAGE IV EXTREME BIOS 3602 03/15/2013 16 GB GSKILL ZL 9-9-9-24-1T @1600MHz Quad Channel HIS HD7979 1050MHz GPU 1500MHz DDR5 120GB OCZ VERTEX 3 SATA 6Gbps ASUS 24X DVD Corsair AX750 WINDOWS 8 PRO X64 6.2.9200.16384 RELEASE😮

R4E3960X wrote:
OK! You can download Intel ME 8.1.30.1350 firmware from Nacrosan link above. Then extract the file by WinZip or WinRAR that you've.

Step 1 :: Move the folder Local-Win64(If you run Windows 64 bit environment , if you run on Windows 32-bit move the folder Local-Win)
to C:\> and open Admin Command Prompt as picture below 😮


Step 2 :: At Admin Command Prompt C:\> Change Directory with simple command you're welknown as picture below:o


Step 3 :: type only "flash" then enter. System will flash your ME with new 8.1.30.1350 Do not shut down during this process.
After finished . Type "exit" to shutdown Admin Command Prompt window then shutdown your system . Complete. 😮

When you've power on your system again. Enter the BIOS page you'll noticable that your ME firmware already updated! 😮


Hi R4E3960X.

I get to do everything right but I get error. I have the version of ME 7. It should be an intermediate step? Can you explain Like the previous method.

Thank you very much.
i7 4930k. Asus Rampage IV Extreme Black Edition. Corsair Dominator Platinum 4x4 16gb 2400CL9 @ 2666 CL10, MSI GTX 780 Lightning . Corsair AX1200. SSD Vertex 4 256 gb. RL Triple Radiator. Block EK HF Supreme. Jet Plate Nº6.

majote
Level 7
Thank you very much R4E3960X, i will try to do it.have you got flash tool to can update from 7 to 8 versión?.I have seen pics and the file is named MEFLASH but i don´t find , a greeting

R4E3960X
Level 10
Hi R4E3960X.

I get to do everything right but I get error. I have the version of ME 7. It should be an intermediate step? Can you explain Like the previous method.

Thank you very much.


Maybe you'll need to upgrade Intel ME Firmware from 7.1.52.1176 to 8.1.10.1286 first then update to 8.1.20.1336 . After that the above method will work for your system. 😮
Intel Core i7 3960X 😮 C2 SR0KF 😮 @3.3GHz ASUS RAMPAGE IV EXTREME BIOS 3602 03/15/2013 16 GB GSKILL ZL 9-9-9-24-1T @1600MHz Quad Channel HIS HD7979 1050MHz GPU 1500MHz DDR5 120GB OCZ VERTEX 3 SATA 6Gbps ASUS 24X DVD Corsair AX750 WINDOWS 8 PRO X64 6.2.9200.16384 RELEASE😮

Melting_Point
Level 10
When I run this, I get the following error message:

Intel (R) Firmware Update Utility Version: 8.1.10.1286
Copyright (C) 2007 - 2012, Intel Corporation. All rights reserved.

Communication Mode: MEI
Checking firmware parameters...

Warning: Do not exit the process or power off the machine before the firmware update process ends.
Sending the update image to FW for verification: [ COMPLETE ]

FW Update: [ 15% (Stage: 4 of 19) (-)]
Error 8741: FW Update Failed.

Error 8706: Firmware update not initiated due to integrity failure or invalid FW image


here's the output from MEInfo:

Intel(R) MEInfo Version: 8.1.10.1286
Copyright(C) 2005 - 2012, Intel Corporation. All rights reserved.

Intel(R) ME code versions:

BIOS Version: 3301
MEBx Version: Not available
Gbe Version: 1.3
VendorID: 8086
PCH Version: 5
FW Version: 8.1.10.1286
UNS Version: Not Available
LMS Version: Not Available
MEI Driver Version: 8.1.10.1275
Wireless Hardware Version: Not Available
Wireless Driver Version: Not Available

FW Capabilities: 0x00110440

Intel(R) Capability Licensing Service - PRESENT/ENABLED
Intel(R) Dynamic Application Loader - PRESENT/ENABLED

Cryptography Support: Disabled
Last ME reset reason: Power up
Local FWUpdate: Enabled
BIOS Config Lock: Disabled
GbE Config Lock: Disabled
Host Read Access to ME: Enabled
Host Write Access to ME: Enabled
SPI Flash ID #1: EF4017
SPI Flash ID VSCC #1: 20052005
SPI Flash BIOS VSCC: 20052005
BIOS boot State: Post Boot
OEM Id: 00000000-0000-0000-0000-000000000000
Capability Licensing Service: Enabled
OEM Tag: 0x00000000
Localized Language: Unknown
Independent Firmware Recovery: Disabled


Any ideas? I've tried this on bios 3301 and 3602, both give the same result.
Motherboard: RIVE (3602 bios)
CPU: Intel 3930K @4646MHz
OS Drive: 2 X Samsung 840 PRO (Raid 0)
Storage Drive: 2 X 1.5TB WD Caviar Black RAID 0, 2 X 3TB WD Caviar Red, Kingston V100 256GB SSD
Memory: 64GB G.SKILL Ripjaws Z (F3-12800CL10Q2-64GBZL)
GPU: Gigabyte GeForce GTX580 @795MHz - 1536MB GDDR5
PSU: OCZ ZX1250
Cooling: Phantek PH-TC14PE
OS: Windows 7 Ultimate x64. (EUFI)

R4E3960X
Level 10
The status above shown that your ME firmware is 8.1.10.1286 already. But the Intel 82579V firmware (Gbe) still not update.
The lastest version of Gbe firmware is 1.5 as you see mine. Please update the Gbe firmware by the same way above but choose
Gbe folder after extract the ME firmware suite.

@ Admin Command Prompt go to Gbe firmware folder. Then run flash like ME folder above.
You'll get the lastest version of Gbe firmware (1.5). After you've completed Gbe firmware update. Restart your system once.
Then back to those method again with the ME firmware 8.1.30.1350. 😮
Intel Core i7 3960X 😮 C2 SR0KF 😮 @3.3GHz ASUS RAMPAGE IV EXTREME BIOS 3602 03/15/2013 16 GB GSKILL ZL 9-9-9-24-1T @1600MHz Quad Channel HIS HD7979 1050MHz GPU 1500MHz DDR5 120GB OCZ VERTEX 3 SATA 6Gbps ASUS 24X DVD Corsair AX750 WINDOWS 8 PRO X64 6.2.9200.16384 RELEASE😮