Results 1 to 3 of 3
  1. #1
    New ROGer Array
    Join Date
    Mar 2013
    Reputation
    10
    Posts
    1

    Angry Rampage Formula 3 - AHCI

    Hi, I would like to know if i am right, I installed a new SSD.
    I updated the driver, my present OS, recognize as well the SSD all Are fine.
    In Bios I swapped the 6gbs as AHCI, rebooted and OS installed new driver.
    Updated also the firmware on ssd

    I have a ssd and 3 other sata hard drive which i doesn't want RAID.

    Is it possible to do this, run os on a ssd in ahci and other drive running ide enhanced sata
    -===-=-=-=-=-=-=-=-===-=-=-=-=-=-=-=-===-=-=-=-=-=-=-=-===-=-=-=-=-=-=-=-===-=-=-=-=-=-=-=-===-=-=-=-=-=-=-=-===-=-=-=-=-=-=-=
    I want be sure when I will install the new hard drive with Windows 7 that will not occur BSOD after

    Please can we confirm that also ?
    +++
    http://www.tomshardware.com/forum/27...ell-9128-issue
    ++++
    I want my 6gbs !!!!!
    Stable no BSOD !

    SATA_6GB = SSD AHCI
    SATA Ide enhanced
    SATA Ide enhanced
    SATA Ide enhanced

  2. #2
    ROG Member Array
    Join Date
    Feb 2013
    Reputation
    10
    Posts
    17

    ACHI does not have RAID, RAID however have functions for ACHI. supported HDD gets NCQ, when ports are set to ACHI.
    The only way to do is, if you got a board with SATA ports running on different controllers, other wise it's not possible to set SSD to ACHI and there rest of your HDD to IDE Enhanced SATA.

  3. #3
    ROG Guru: Yellow Belt Array oldbrave's Avatar
    Join Date
    Nov 2011
    Reputation
    13
    Posts
    240

    Welcome to the forums !
    I don't understand why you want to give up the performance you get with AHCI for your HDD's. You have already installed the AHCI driver for your Sata controller so there should not be any problems in installing the other 3 sata drives. Raid is something you have to initialize, it doesn't set itself up.
    Electronic Smoke Signals From my TechnoTeepee
    ASUS Crosshair V Formula AM3+ 990FX, 1703 bios
    AMD FX 8350 Vishera @ 5162Mhz [21x245] 1.546v
    Water Cooled - Koolance EX2-1055, CPU 370 WB, Idle=22c Load=52c
    32Gb G.Skill Sniper ddr3 1600 8G X 4 , 9-9-9-24 @ 1.55v
    ASUS HD7970-DC2T-3GD5, Cat 13.5 beta 2, Dell U3011 @ 2560x1600
    SanDisk Extreme 120Gb SSD SATA 6Gb, 250Gb SATA 6Gb, 1Tb SATA 6Gb x2
    Win 7 Ultimate 64bit, Corsair Obsidian 800D, Corsair HX1000w PSU

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •