So I decided to update my bios from 1204 to 13 W/e I decided to do it via that Asus software package when the automatically DL latest bios option wouldn't work because it couldn't connect to the Asus servers I did the manual option where I downloaded it from the the site and selected the File via a run path from the software and hit "run/install it" detected it as the right version and when it finished it said to restart I did that and windows wouldnt boot its stuck at the post screen asking me to setup in the bios when I do and regardless of the options I picked the screen would go black and at the top right the an underscore(_) would be flashing and the debug code would read 00 since I was I gonna install my parts the next day I waited and would check the CPU pins and swap ram sticks. I've done all that I have nearly the same issue I'm stuck in a ppost loop same "press f1 to setup" post codes 34 and 64 I managed to use ez flashback in the bios which works and flashed the bios to 1404 also the 13xx flash didn't work and the his , before I flashed it read 1204 or w/e it was. Previous to this I've never had any issues. Specs are
I73930k
R4e (duh)
4x4gb (16gb) 2133mhz dominator
H100 with cooler master r4s on a fan controller @100%
Gtx580
C300 ssd boot
1tb WD caviar black hdd
ANTEC HCP-1200W PSU
As far as LEDs on the the Board the yellow bios and yellow graphics card are lit along with a red one just behind the main board power cord port labeled VGA