Question if anyone here uses Latency monitor to "figure out" stuff with the comp as someone turned me to it the past few weeks and I have yet to have a Normal usage out of it within the first hour.
First off, Latencymon says my USB 1.0 & 2.0 port drivers use alot of DPC count. No idea what to do about that as I used old and new drivers for the motherboard.
My motherboard is P67 Maximus IV Extreme from Asus.
So from here, I can also say... For those who know what Latency monitor is... I easily start getting near full redbars on the "highest measured interrupt to process latency" area.
Fresh installed as well ect.
Now I do know these motherboards for some reason have CRAP usb ports. So could be one reason.
Another thing I tried is in bios as well, I even put things to Maximum performance and power saver as well as in windows. Did not really change a thing even for RED BARS in the Highest measured interrupt to process latency area.
Dunno, just thought I would ask, as well as see if anyone thinks this program is just junk.
Fresh installed windows has same problems ect.
Thought I would start doing some more "in depth" checks on my computer these days and this was a place to start off in a sense.
Thanks.