©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

usul · ‎04-26-2013

i have the Maximus V formula with Intel 3770k cpu. i also purchased G.SKILL Ripjaws Z Series 16GB (4 x 4GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-19200CL11Q-16GBZHD. it runs fine when running in default mode but if i turn on XMP within an hour or 2 it will BSOD i am running it with the supplied fan on it (only 1 will fit on this board). has anyone else run into this issue?

MB : Asus ROG MAXIMUS VIII HERO ALPHA BIOS 3801
CPU : i7 6770 @ 3.4GHZ
RAM : G.SKILL 32GB (2 x 16GB) Ripjaws V Series DDR4 PC4-25600 3200MHz
Disks : Samsung 950 PRO Series - 512GB PCIe NVMe - M.2 Internal SSD Kingston HyperX 3K 120 GB SATA III x2
GFX: ASUS ROG Strix GeForce® GTX 1070 Ti 8GB
Audio: SupremeFX IV
PSU: SeaSonic Platinum-860 860W
Cooler:Corsair NZXT Kraken X61
Case: NZXT Razer H440
System.OS.: Win7 Ultimate 64 / Windows 10 64

Chino · ‎04-26-2013

Welcome to the Republic of Gamers forums, usul.

Please do some Memtest86+ runs on your RAM. If you're not familiar with the test, you can find a simple guide written by a friend of mines in my signature.

Here's a lit of test that you'll need to perform.
1. Test each module individually at their default speed then their XMP speed.
2. Test them together at their default speed then their XMP speed.

Each test should be error free. Let us know the outcome. 😉

usul · ‎04-29-2013

OK ran Memtest in both modes and all went well and passed all tests. so i went and kept XMP on and booted up. within 10 minutes the system froze and a horrible screeching sound came out of the speakers until i powered off. went back in and turned xmp off and it runs OK so far.

MB : Asus ROG MAXIMUS VIII HERO ALPHA BIOS 3801
CPU : i7 6770 @ 3.4GHZ
RAM : G.SKILL 32GB (2 x 16GB) Ripjaws V Series DDR4 PC4-25600 3200MHz
Disks : Samsung 950 PRO Series - 512GB PCIe NVMe - M.2 Internal SSD Kingston HyperX 3K 120 GB SATA III x2
GFX: ASUS ROG Strix GeForce® GTX 1070 Ti 8GB
Audio: SupremeFX IV
PSU: SeaSonic Platinum-860 860W
Cooler:Corsair NZXT Kraken X61
Case: NZXT Razer H440
System.OS.: Win7 Ultimate 64 / Windows 10 64

NemesisChild · ‎04-29-2013

Have you manually applied the DRAM voltage in the bios?
Running with all 4 dimms populated may require a bit more voltage above spec.

Intel i9 10850K@ 5.3GHz
ASUS ROG Strix Z490-E
Corsair H115i Pro XT
G.Skill TridentZ@ 3600MHz CL14 2x16GB
EVGA RTX 3090 Ti FWT3 Ultra
OS: WD Black SN850 1TB NVMe M.2
Storage: WD Blue SN550 2TB NVMe M.2
EVGA SuperNova 1200 P2
ASUS ROG Strix Helios GX601

usul · ‎04-29-2013

no i did nothing other than turn ram speed from auto to XMP

MB : Asus ROG MAXIMUS VIII HERO ALPHA BIOS 3801
CPU : i7 6770 @ 3.4GHZ
RAM : G.SKILL 32GB (2 x 16GB) Ripjaws V Series DDR4 PC4-25600 3200MHz
Disks : Samsung 950 PRO Series - 512GB PCIe NVMe - M.2 Internal SSD Kingston HyperX 3K 120 GB SATA III x2
GFX: ASUS ROG Strix GeForce® GTX 1070 Ti 8GB
Audio: SupremeFX IV
PSU: SeaSonic Platinum-860 860W
Cooler:Corsair NZXT Kraken X61
Case: NZXT Razer H440
System.OS.: Win7 Ultimate 64 / Windows 10 64

NemesisChild · ‎04-29-2013

Can't remember if enabling XMP profile automatically sets the required DRAM voltage.
Any event, I would not let the board decide what voltage to run at.
So, please manually set the DRAM voltage in the bios and you should be good to go.

Intel i9 10850K@ 5.3GHz
ASUS ROG Strix Z490-E
Corsair H115i Pro XT
G.Skill TridentZ@ 3600MHz CL14 2x16GB
EVGA RTX 3090 Ti FWT3 Ultra
OS: WD Black SN850 1TB NVMe M.2
Storage: WD Blue SN550 2TB NVMe M.2
EVGA SuperNova 1200 P2
ASUS ROG Strix Helios GX601

usul · ‎04-29-2013

i have no idea what the voltages are presently and don't know what to change them to.

MB : Asus ROG MAXIMUS VIII HERO ALPHA BIOS 3801
CPU : i7 6770 @ 3.4GHZ
RAM : G.SKILL 32GB (2 x 16GB) Ripjaws V Series DDR4 PC4-25600 3200MHz
Disks : Samsung 950 PRO Series - 512GB PCIe NVMe - M.2 Internal SSD Kingston HyperX 3K 120 GB SATA III x2
GFX: ASUS ROG Strix GeForce® GTX 1070 Ti 8GB
Audio: SupremeFX IV
PSU: SeaSonic Platinum-860 860W
Cooler:Corsair NZXT Kraken X61
Case: NZXT Razer H440
System.OS.: Win7 Ultimate 64 / Windows 10 64

majorwoody · ‎04-29-2013

you will find some great guides and some fantastic advice on this ROG so with plenty of reading and patience grasshopper and soon you to will be running with big dogs

Granamere · ‎04-29-2013

I think this is your RAm.

http://www.newegg.com/Product/Product.aspx?Item=N82E16820231505

If so here are you specs.

•DDR3 2400 (PC3 19200)
•Timing 11-11-11-31
•Cas Latency 11
•Voltage 1.65V

XMP should set it correctly but it never hurts to double check.

What BIOS are you running?

OS: Windows 8
CPU: I-7 3770k
Cooling: NZXT Kraken X40
GPU: evga Titan Superclocked Signature
Motherboard: Asus Maximus V Extreme (BIOS 1707)
Memory: Corsair Veneance 16GB (2x8GB) DDR3 1866 (Timing 9-10-9-27)
Sound Card: built on motherboard or Logitech g930
PSU: Corsair AX1200i
Case: Rosewill THOR V2

usul · ‎04-29-2013

MB : Asus Maximus V Formula BIOS 1707
XMP should set it correctly is my thought exactly, i preordered this board when it came out and XMP has never worked. i am thinking its a bad MoBo

MB : Asus ROG MAXIMUS VIII HERO ALPHA BIOS 3801
CPU : i7 6770 @ 3.4GHZ
RAM : G.SKILL 32GB (2 x 16GB) Ripjaws V Series DDR4 PC4-25600 3200MHz
Disks : Samsung 950 PRO Series - 512GB PCIe NVMe - M.2 Internal SSD Kingston HyperX 3K 120 GB SATA III x2
GFX: ASUS ROG Strix GeForce® GTX 1070 Ti 8GB
Audio: SupremeFX IV
PSU: SeaSonic Platinum-860 860W
Cooler:Corsair NZXT Kraken X61
Case: NZXT Razer H440
System.OS.: Win7 Ultimate 64 / Windows 10 64

Maximus V Formula Memory BSOD when XMP is on