Results 1 to 1 of 1

Thread: RAID Card Help

  1. #1
    New ROGer Array
    Join Date
    May 2013

    RAID Card Help

    Hello all, brand new member here

    Board Crosshair V Formula Z
    CPU AMD 965 BE
    Memory Corsair Vengeance 1600 4GB x2
    Boot drive Corsair Neutron GTX 120GB
    Win 7 Ult 64bit
    AMD Raid 2x OCZ Vertex 120GB

    Bios 1302 all defaults

    OK with all that out of the way here is my problem, I have a Highpoint Rocketraid 622 card that works flawlessly and controls a
    Rosewill RSV External enclosure, everything works fine with one exception. This MB is brand new just got it and spent all day
    setting it up and everything. SO if I boot into windows with the Rosewill enclosure on and connected via the eSata cable the MB will not go past POST. Not even make it to windows boot logo, and the MB beeps continuously. If I disconnect the eSata cable and turn off the enclosure then I can successfully boot into windows, but then I have to connect the eSata cable and power on the enclosure only after I am in windows. Does any one know why because its a pain in the but. This only happens on this MB I have a working M4A89GTD Pro and no problems over there. I am dumbfounded Please help. Seriously Thanks

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts