cancel
Showing results for 
Search instead for 
Did you mean: 

Code AE - Rampage IV Ex with 4004 Bios

Xerozen
Level 7
I don't have my book with me, but my computer tower has been having issues as of late. I Flashed 4004 to my RIVEX today hoping to even be able to get to my desktop or even install Windows. On the little LED display in the upper right corner of the motherboard I get 'AE'. Before that it was code '34'. I've done both bios chips to 4004- beyond that- my tower doesn't display on my monitor which I had no problems with on 3301 Nodens for the last 8 months. I have no overclock on, or anything at the moment because my computer tower crashed on Windows 8- with a Watchdog Error. I've tried fixing it, reinstalling Windows 8 I still get Watchdog Errors. So I tried to go back to Windows 7- and its a constant loop getting to 69 before going back through the numbers on to 67 before getting to 69 and recycling. I need some helpful advice or suggestions. Please and Thank you.

Xerozen
PANDORICA
ASUS RAMPAGE IV EXTREME Noden's 3301 x64 (intel ME & GBE FW 8.1.20.1336) Win8Pro x64 MCE
intel Core i7 3930K C2 @1.2-4.7, 0.88-1.32V OffsetVCore +0.025V MedLLC H/T Disabled 200GFlops
Corsair H100 Intake Push with IC Diamond (idle at 26C, load at 81C)
Corsair Vengeance Memory 32GB 1866 (8-9-8-24-96-1.55V) MEMScore 115652 Red
EVGA GTX 580 Superclock x3 in SLI (Stock) with EVGA Powerboost
Corsiar ForceGT 180GB x2 in R0 (11.6.0.1702) (1045R/1004W) on 6GB SATA III (C600 11.7.0.1013)
5,741 Views
5 REPLIES 5

Arne_Saknussemm
Level 40
Hmmm sorry you've got troubles Xerozen

Maybe you should try starting kind of fresh. Unplug all power and remove the battery for a few hours to reset the board. Maybe flash the BIOS to the last known working version and try a fresh install at stock settings with only one stick of ram in the correct slot one GPU and no connections except key board and mouse. See if you can get up and running that way and then if you're stable add more Ram and then the other GPUs

Maybe just to be double sure Memtest86 your RAM before install...

SUKARA
Level 10
Did you have try to do once "CLRTC" setting?

Nodens
Level 16
If you flashed my patched 4004, revert to a previous version or flash the stock one. There is an issue with the patched 4004 and I'm currently investigating it.
RAMPAGE Windows 8/7 UEFI Installation Guide - Patched OROM for TRIM in RAID - Patched UEFI GOP Updater Tool - ASUS OEM License Restorer
There are 10 types of people in the world. Those who understand binary and those who don't!

RealBench Developer.

izajasz
Level 10
Do flashback with newest stock BIOS . Rename the BIOS files to RIVE.CAP or ERALL.CAP (you can read about that on the forums) and see if it works properly ; )
MOBO: MVIE BIOS 1402 stock
CPU Core i7 4770K
RAM: 16GB Corsair Dom. Platinum CMD16GX3M4A1866C9 in XMP, SPEC: http://bit.ly/Z56xfm
SSD/HDD: OS-SAMS 840Pro 256GB, APPS - SAMS 830 512GB, DATA - Seagate ST1000DM003
GPU: 2x EVGA GTX 680 FTW+ in SLI config (UEFI BIOS)
AUDIO: Onboard
CPU Cooling: Corsair H110
PSU: Seasonic Platinum 1000W (SS-1000XP)
CASE: NZXT Phantom 630
DISPLAY: ASUS VG278Q (120Hz)

HiVizMan
Level 40
Good advice izajasz. 🙂
To help us help you - please provide as much information about your system and the problem as possible.