cancel
Showing results for 
Search instead for 
Did you mean: 

maximus extreme iv code 98 fix

icemanjs
Level 7
what is code 98 and how do i fix it..i disconnected all my usb devices and it still gives me code 98...
8,106 Views
8 REPLIES 8

Raja
Level 13
Hi,

Can you please list all parts used, UEFI version and also if the system is overclocked or not?

-Raja

i think i got it but heres the list

i 2600k
asus maximus extreme iv
corsair vengence ram
sapphire 6970
corsair hx850
corsair h100 cooler
ocz revo drive 120gb
ocz revo drive 240gb version 2
intel 510 ssd's 120gb x2
raptor drive
western digital 420gb sata drive
2 plextor 755a's optical drives
asus xonce sound card
logitech g700 mouse
razer keyboard
linksys wireless usb adapter
apc 1200 ups

Raja
Level 13
Have you tried without the Revo drives plugged in?

It's a very heavy setup you have there. To debug this you are going to have to start pulling some of those drives I think. Will also need to know exactly what port which drive is connected to and which of those is your boot drive together with the SATA settings used.

Also is the system at stock or overclocked?

Finally, what UEFI version are you using?

-Raja

whats uefi?its something to do with the back usb's again..when i unplug them all it boots..i start adding 1 at a time its fine untill it boots up fine..shut it down after use then go to use it the next day then the same issue again...

pc is stocked

Raja
Level 13
You probably know of UEFI as BIOS.

You need to work out which of the USB devices it is. I would start with the Logitech mouse.

-Raja

and why do u assume that one first?on newest bios

Raja
Level 13
Assume what? You asked me what UEFI was as I asked you what version.

Now I am going to assume you are talking about the mouse. I think some of the Logitech mice do not sit well with UEFI.

ah gotcha..i will look into it