Results 11 to 20 of 170
-
06-23-2013 02:49 PM #11
- Join Date
- Jun 2013
- Reputation
- 10
- Posts
- 6
hi Raja, i have some problem with vcore! i can't set 1,85 or 1,87v of vcore under ln2! On my Gene Vi, vcore scale from 1,82 to 1,91 without any intermiddle step!
MemTweaker don't work.....where can i find new bios for my gene? Thanks
-
06-23-2013 07:41 PM #12
http://www.mediafire.com/?2l6a1u93sa0rx0x
Intel do not leave Memory config open, so NO in OS memory tweaking is possible for anyone on this platform yet.
-
06-24-2013 06:41 AM #13
- Join Date
- Jun 2013
- Reputation
- 10
- Posts
- 6
-
06-25-2013 07:01 AM #14
You might run into problems around 2V on some retails - risky.
-
06-26-2013 05:01 PM #15
- Join Date
- Jun 2013
- Reputation
- 10
- Posts
- 20
What a fantastic work ! I will receive my Maximus VI Hero tomorrow and this guide will be very helpful.
Such a support is one of the reasons I buy ASUS ROG motherboards.
Thanks.
-
06-27-2013 06:56 PM #16
No problem. Hope it helps.
-
07-04-2013 12:02 PM #17
- Join Date
- Jul 2011
- Reputation
- 10
- Posts
- 4
Great guide thx. I started to overclock my i5 4670K so far I reached 4.4Ghz at 1.26 vCore. Just have few question should i change Cache voltage or its alright to leave it on Auto and How high on vCore is safe?
-
07-08-2013 11:34 AM #18
You can tune the voltages based upon how good your CPU is. The auto voltages take most of the worst case CPUs into account, so you may be able to lower somewhat. As for how much VCore is safe, who knows. The less you can get away with, the better.
-
07-08-2013 03:55 PM #19
Is there a UEFI / Bios update for the Maximus VI Hero to make it more stable?
MEGAStarkey
Intel i7 4770kOC @ 4.6 / 1.25v - Maximus VI Extreme - 16gb Team Xtreem @2400
Gigabyte R9 290x Windforce OC
Intel i7 4670kOC @ 4.2 - ASUS Z97i Plus - 8gb Crucial Ballistix@1600
ASUS 660GTX
AMD FX8350OC @ 4.8 Ghz Stable - Crosshair V Formula-Z -8gb Crucial Ballistix @1600
ASUS 660GTX
-
07-08-2013 04:01 PM #20
More stable? What's the issue?